From: Yi Yang <yang.y.yi@gmail.com>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Andrew Morton <akpm@osdl.org>
Subject: [2.6.16 PATCH] some tail whitespace clean under subdirectory kernel
Date: Wed, 22 Mar 2006 23:36:31 +0800 [thread overview]
Message-ID: <44216EFF.6050503@gmail.com> (raw)
This patch cleans some tail whitespaces under subdirectory kernel.
diffstat
capability.c | 20 ++++++++++----------
fork.c | 12 ++++++------
signal.c | 14 +++++++-------
sys.c | 38 +++++++++++++++++++-------------------
timer.c | 18 +++++++++---------
5 files changed, 51 insertions(+), 51 deletions(-)
Signed-off-by: Yi Yang <yang.y.yi@gmail.com>
--- a/kernel/capability.c.orig 2006-03-22 23:04:30.000000000 +0800
+++ b/kernel/capability.c 2006-03-22 23:07:06.000000000 +0800
@@ -5,7 +5,7 @@
*
* Integrated into 2.1.97+, Andrew G. Morgan <morgan@transmeta.com>
* 30 May 2002: Cleanup, Robert M. Love <rml@tech9.net>
- */
+ */
#include <linux/capability.h>
#include <linux/mm.h>
@@ -54,18 +54,18 @@ asmlinkage long sys_capget(cap_user_head
if (version != _LINUX_CAPABILITY_VERSION) {
if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
+ return -EFAULT;
return -EINVAL;
}
if (get_user(pid, &header->pid))
return -EFAULT;
- if (pid < 0)
+ if (pid < 0)
return -EINVAL;
spin_lock(&task_capability_lock);
- read_lock(&tasklist_lock);
+ read_lock(&tasklist_lock);
if (pid && pid != current->pid) {
target = find_task_by_pid(pid);
@@ -79,11 +79,11 @@ asmlinkage long sys_capget(cap_user_head
ret = security_capget(target, &data.effective, &data.inheritable, &data.permitted);
out:
- read_unlock(&tasklist_lock);
+ read_unlock(&tasklist_lock);
spin_unlock(&task_capability_lock);
if (!ret && copy_to_user(dataptr, &data, sizeof data))
- return -EFAULT;
+ return -EFAULT;
return ret;
}
@@ -177,16 +177,16 @@ asmlinkage long sys_capset(cap_user_head
pid_t pid;
if (get_user(version, &header->version))
- return -EFAULT;
+ return -EFAULT;
if (version != _LINUX_CAPABILITY_VERSION) {
if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
+ return -EFAULT;
return -EINVAL;
}
if (get_user(pid, &header->pid))
- return -EFAULT;
+ return -EFAULT;
if (pid && pid != current->pid && !capable(CAP_SETPCAP))
return -EPERM;
@@ -194,7 +194,7 @@ asmlinkage long sys_capset(cap_user_head
if (copy_from_user(&effective, &data->effective, sizeof(effective)) ||
copy_from_user(&inheritable, &data->inheritable, sizeof(inheritable)) ||
copy_from_user(&permitted, &data->permitted, sizeof(permitted)))
- return -EFAULT;
+ return -EFAULT;
spin_lock(&task_capability_lock);
read_lock(&tasklist_lock);
--- a/kernel/fork.c.orig 2006-03-22 23:04:47.000000000 +0800
+++ b/kernel/fork.c 2006-03-22 23:11:18.000000000 +0800
@@ -245,7 +245,7 @@ static inline int dup_mmap(struct mm_str
get_file(file);
if (tmp->vm_flags & VM_DENYWRITE)
atomic_dec(&inode->i_writecount);
-
+
/* insert tmp into the share list, just after mpnt */
spin_lock(&file->f_mapping->i_mmap_lock);
tmp->vm_truncate_count = mpnt->vm_truncate_count;
@@ -701,8 +701,8 @@ static struct files_struct *dup_fd(struc
/* compute the remainder to be cleared */
size = (new_fdt->max_fds - open_files) * sizeof(struct file *);
- /* This is long word aligned thus could use a optimized version */
- memset(new_fds, 0, size);
+ /* This is long word aligned thus could use a optimized version */
+ memset(new_fds, 0, size);
if (new_fdt->max_fdset > open_files) {
int left = (new_fdt->max_fdset-open_files)/8;
@@ -1078,7 +1078,7 @@ static task_t *copy_process(unsigned lon
/* Our parent execution domain becomes current domain
These must match for thread signalling to apply */
-
+
p->parent_exec_id = p->self_exec_id;
/* ok, now we should be set up.. */
@@ -1357,10 +1357,10 @@ void __init proc_caches_init(void)
signal_cachep = kmem_cache_create("signal_cache",
sizeof(struct signal_struct), 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
- files_cachep = kmem_cache_create("files_cache",
+ files_cachep = kmem_cache_create("files_cache",
sizeof(struct files_struct), 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
- fs_cachep = kmem_cache_create("fs_cache",
+ fs_cachep = kmem_cache_create("fs_cache",
sizeof(struct fs_struct), 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL);
vm_area_cachep = kmem_cache_create("vm_area_struct",
--- a/kernel/signal.c.orig 2006-03-22 23:05:10.000000000 +0800
+++ b/kernel/signal.c 2006-03-22 23:12:53.000000000 +0800
@@ -545,7 +545,7 @@ static int __dequeue_signal(struct sigpe
}
/*
- * Dequeue a signal and return the element to the caller, which is
+ * Dequeue a signal and return the element to the caller, which is
* expected to free it.
*
* All callers have to hold the siglock.
@@ -765,7 +765,7 @@ static void handle_stop_signal(int sig,
* running the handler. With the TIF_SIGPENDING
* flag set, the thread will pause and acquire the
* siglock that we hold now and until we've queued
- * the pending signal.
+ * the pending signal.
*
* Wake up the stopped thread _after_ setting
* TIF_SIGPENDING
@@ -1297,7 +1297,7 @@ send_sig_info(int sig, struct siginfo *i
* lists) in order to avoid races with "p->sighand"
* going away or changing from under us.
*/
- read_lock(&tasklist_lock);
+ read_lock(&tasklist_lock);
spin_lock_irqsave(&p->sighand->siglock, flags);
ret = specific_send_sig_info(sig, info, p);
spin_unlock_irqrestore(&p->sighand->siglock, flags);
@@ -1369,12 +1369,12 @@ kill_proc(pid_t pid, int sig, int priv)
* These functions support sending signals using preallocated sigqueue
* structures. This is needed "because realtime applications cannot
* afford to lose notifications of asynchronous events, like timer
- * expirations or I/O completions". In the case of Posix Timers
+ * expirations or I/O completions". In the case of Posix Timers
* we allocate the sigqueue structure from the timer_create. If this
* allocation fails we are able to report the failure to the application
* with an EAGAIN error.
*/
-
+
struct sigqueue *sigqueue_alloc(void)
{
struct sigqueue *q;
@@ -1517,7 +1517,7 @@ send_group_sigqueue(int sig, struct sigq
BUG();
q->info.si_overrun++;
goto out;
- }
+ }
/*
* Put this signal on the shared-pending queue.
@@ -2501,7 +2501,7 @@ do_sigaction(int sig, struct k_sigaction
return 0;
}
-int
+int
do_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, unsigned long sp)
{
stack_t oss;
--- a/kernel/sys.c.orig 2006-03-22 23:05:23.000000000 +0800
+++ b/kernel/sys.c 2006-03-22 23:13:58.000000000 +0800
@@ -92,7 +92,7 @@ int cad_pid = 1;
/*
* Notifier list for kernel code which wants to be called
* at shutdown. This is used to stop any idling DMA operations
- * and the like.
+ * and the like.
*/
static struct notifier_block *reboot_notifier_list;
@@ -107,7 +107,7 @@ static DEFINE_RWLOCK(notifier_lock);
*
* Currently always returns zero.
*/
-
+
int notifier_chain_register(struct notifier_block **list, struct notifier_block *n)
{
write_lock(¬ifier_lock);
@@ -134,7 +134,7 @@ EXPORT_SYMBOL(notifier_chain_register);
*
* Returns zero on success, or %-ENOENT on failure.
*/
-
+
int notifier_chain_unregister(struct notifier_block **nl, struct notifier_block *n)
{
write_lock(¬ifier_lock);
@@ -169,7 +169,7 @@ EXPORT_SYMBOL(notifier_chain_unregister)
* Otherwise, the return value is the return value
* of the last notifier function called.
*/
-
+
int __kprobes notifier_call_chain(struct notifier_block **n, unsigned long val, void *v)
{
int ret=NOTIFY_DONE;
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(notifier_call_chain);
* Currently always returns zero, as notifier_chain_register
* always returns zero.
*/
-
+
int register_reboot_notifier(struct notifier_block * nb)
{
return notifier_chain_register(&reboot_notifier_list, nb);
@@ -216,7 +216,7 @@ EXPORT_SYMBOL(register_reboot_notifier);
*
* Returns zero on success, or %-ENOENT on failure.
*/
-
+
int unregister_reboot_notifier(struct notifier_block * nb)
{
return notifier_chain_unregister(&reboot_notifier_list, nb);
@@ -595,7 +595,7 @@ void ctrl_alt_del(void)
*
* The general idea is that a program which uses just setregid() will be
* 100% compatible with BSD. A program which uses just setgid() will be
- * 100% compatible with POSIX with saved IDs.
+ * 100% compatible with POSIX with saved IDs.
*
* SMP: There are not races, the GIDs are checked only by filesystem
* operations (as far as semantic preservation is concerned).
@@ -647,7 +647,7 @@ asmlinkage long sys_setregid(gid_t rgid,
}
/*
- * setgid() is implemented like SysV w/ SAVED_IDS
+ * setgid() is implemented like SysV w/ SAVED_IDS
*
* SMP: Same implicit races as above.
*/
@@ -685,7 +685,7 @@ asmlinkage long sys_setgid(gid_t gid)
proc_id_connector(current, PROC_EVENT_GID);
return 0;
}
-
+
static int set_user(uid_t new_ruid, int dumpclear)
{
struct user_struct *new_user;
@@ -725,7 +725,7 @@ static int set_user(uid_t new_ruid, int
*
* The general idea is that a program which uses just setreuid() will be
* 100% compatible with BSD. A program which uses just setuid() will be
- * 100% compatible with POSIX with saved IDs.
+ * 100% compatible with POSIX with saved IDs.
*/
asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
{
@@ -780,15 +780,15 @@ asmlinkage long sys_setreuid(uid_t ruid,
/*
- * setuid() is implemented like SysV with SAVED_IDS
- *
+ * setuid() is implemented like SysV with SAVED_IDS
+ *
* Note that SAVED_ID's is deficient in that a setuid root program
- * like sendmail, for example, cannot set its uid to be a normal
+ * like sendmail, for example, cannot set its uid to be a normal
* user and then switch back, because if you're root, setuid() sets
* the saved uid too. If you don't like this, blame the bright people
* in the POSIX committee and/or USG. Note that the BSD-style setreuid()
* will allow a root program to temporarily drop privileges and be able to
- * regain them by swapping the real and effective uid.
+ * regain them by swapping the real and effective uid.
*/
asmlinkage long sys_setuid(uid_t uid)
{
@@ -953,7 +953,7 @@ asmlinkage long sys_setfsuid(uid_t uid)
return old_fsuid;
if (uid == current->uid || uid == current->euid ||
- uid == current->suid || uid == current->fsuid ||
+ uid == current->suid || uid == current->fsuid ||
capable(CAP_SETUID))
{
if (uid != old_fsuid)
@@ -984,7 +984,7 @@ asmlinkage long sys_setfsgid(gid_t gid)
return old_fsgid;
if (gid == current->gid || gid == current->egid ||
- gid == current->sgid || gid == current->fsgid ||
+ gid == current->sgid || gid == current->fsgid ||
capable(CAP_SETGID))
{
if (gid != old_fsgid)
@@ -1454,7 +1454,7 @@ out:
* SMP: Our groups are copy-on-write. We can set them safely
* without another task interfering.
*/
-
+
asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
{
struct group_info *group_info;
@@ -1608,7 +1608,7 @@ asmlinkage long sys_getrlimit(unsigned i
/*
* Back compatibility for getrlimit. Needed for some apps.
*/
-
+
asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
{
struct rlimit x;
@@ -1765,7 +1765,7 @@ asmlinkage long sys_umask(int mask)
mask = xchg(¤t->fs->umask, mask & S_IRWXUGO);
return mask;
}
-
+
asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5)
{
--- a/kernel/timer.c.orig 2006-03-22 23:05:36.000000000 +0800
+++ b/kernel/timer.c 2006-03-22 23:14:46.000000000 +0800
@@ -436,7 +436,7 @@ static inline void __run_timers(tvec_bas
struct list_head work_list = LIST_HEAD_INIT(work_list);
struct list_head *head = &work_list;
int index = base->timer_jiffies & TVR_MASK;
-
+
/*
* Cascade timers:
*/
@@ -445,7 +445,7 @@ static inline void __run_timers(tvec_bas
(!cascade(base, &base->tv3, INDEX(1))) &&
!cascade(base, &base->tv4, INDEX(2)))
cascade(base, &base->tv5, INDEX(3));
- ++base->timer_jiffies;
+ ++base->timer_jiffies;
list_splice_init(base->tv1.vec + index, &work_list);
while (!list_empty(head)) {
void (*fn)(unsigned long);
@@ -570,9 +570,9 @@ found:
unsigned long tick_usec = TICK_USEC; /* USER_HZ period (usec) */
unsigned long tick_nsec = TICK_NSEC; /* ACTHZ period (nsec) */
-/*
- * The current time
- * wall_to_monotonic is what we need to add to xtime (or xtime corrected
+/*
+ * The current time
+ * wall_to_monotonic is what we need to add to xtime (or xtime corrected
* for sub jiffie times) to get to monotonic time. Monotonic is pegged
* at zero at system boot time, so wall_to_monotonic will be negative,
* however, we will ALWAYS keep the tv_nsec part positive so we can use
@@ -824,7 +824,7 @@ static void update_wall_time(unsigned lo
}
/*
- * Called from the timer interrupt handler to charge one tick to the current
+ * Called from the timer interrupt handler to charge one tick to the current
* process. user_tick is 1 if the tick is user time, 0 for system.
*/
void update_process_times(int user_tick)
@@ -931,7 +931,7 @@ static inline void update_times(void)
}
calc_load(ticks);
}
-
+
/*
* The 64-bit jiffies value is not atomic - you MUST NOT read it
* without sampling the sequence number in xtime_lock.
@@ -1169,7 +1169,7 @@ asmlinkage long sys_gettid(void)
/*
* sys_sysinfo - fill in sysinfo struct
- */
+ */
asmlinkage long sys_sysinfo(struct sysinfo __user *info)
{
struct sysinfo val;
@@ -1320,7 +1320,7 @@ static void __devinit migrate_timers(int
}
#endif /* CONFIG_HOTPLUG_CPU */
-static int __devinit timer_cpu_notify(struct notifier_block *self,
+static int __devinit timer_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
long cpu = (long)hcpu;
next reply other threads:[~2006-03-22 15:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-22 15:36 Yi Yang [this message]
2006-03-22 18:36 ` [2.6.16 PATCH] some tail whitespace clean under subdirectory kernel Jiri Slaby
2006-03-23 1:05 ` Yi Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44216EFF.6050503@gmail.com \
--to=yang.y.yi@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.