From: Mark Lord <lkml@rtr.ca>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: 2.6.16-git4: kernel BUG at block/ll_rw_blk.c:3497
Date: Mon, 27 Mar 2006 19:51:14 -0500 [thread overview]
Message-ID: <44288882.4020809@rtr.ca> (raw)
This popped up during heavy RAID5 testing today (2.6.16-git4).
The SATA drives are being run by a modified sata_mv that I'm testing,
and it seems to be behaving now, except for the BUG below:
Cheers
------------[ cut here ]------------
kernel BUG at block/ll_rw_blk.c:3497!
invalid opcode: 0000 [#1]
PREEMPT SMP
Modules linked in: sata_mv libata raid5 xor snd_pcm_oss snd_pcm snd_timer
snd_page_alloc snd_mixer_oss snd soundcore edd pl2303 usbserial usblp usbhid
evdev joydev sg sr_mod ide_cd cdrom af_packet ohci_hcd sworks_agp agpgart e100
mii i2c_piix4 i2c_core usbcore sd_mod dm_mod scsi_mod
CPU: 1
EIP: 0060:[<b0209e76>] Not tainted VLI
EFLAGS: 00010246 (2.6.16-git4 #1)
EIP is at put_io_context+0x66/0x80
eax: 00000000 ebx: b1ac096c ecx: e3ced12c edx: ef25b798
esi: ed72a570 edi: ed72aa20 ebp: 00000000 esp: d2619f78
ds: 007b es: 007b ss: 0068
Process cat (pid: 16399, threadinfo=d2618000 task=ed72a570)
Stack: <0>b19acba0 b0124ea5 00000004 d2619fbc d2619fbc b035c26b 00000001 00000000
e043b660 d2618000 00000000 b0125097 00000000 3abf1f04 3abf1f04 d2618000
b0102e1b 00000000 00000000 00000000 3abf1f04 3abf1f04 aff1e8d8 000000fc
Call Trace:
[<b0124ea5>] do_exit+0x295/0x410
[<b0125097>] do_group_exit+0x37/0xa0
[<b0102e1b>] sysenter_past_esp+0x54/0x75
Code: 75 22 b8 00 e0 ff ff 21 e0 ff 48 14 8b 40 08 a8 08 75 24 89 da 5b a1 44 b8
46 b0 e9 65 6a f5 ff ff d2 eb d0 90 ff d2 eb d9 5b c3 <0f> 0b a9 0d 2c ac 36 b0
89 f6 eb 9b e8 79 f2 12 00 eb d5 8d b4
<1>Fixing recursive fault but reboot is needed!
... later on ...
Unable to handle kernel paging request at virtual address 00100104
printing eip:
b0212078
*pde = 00000000
Oops: 0002 [#2]
PREEMPT SMP
Modules linked in: sata_mv libata raid5 xor snd_pcm_oss snd_pcm snd_timer
snd_page_alloc snd_mixer_oss snd soundcore edd pl2303 usbserial usblp usbhid
evdev joydev sg sr_mod ide_cd cdrom af_packet ohci_hcd sworks_agp agpgart e100
mii i2c_piix4 i2c_core usbcore sd_mod dm_mod scsi_mod
CPU: 1
EIP: 0060:[<b0212078>] Not tainted VLI
EFLAGS: 00010206 (2.6.16-git4 #1)
EIP is at cfq_get_io_context+0xd8/0x1a0
eax: 00100100 ebx: ef25b7e4 ecx: efce7a80 edx: 00200200
esi: ef25b208 edi: e3ced000 ebp: b1ac0480 esp: efd01a08
ds: 007b es: 007b ss: 0068
Process kswapd0 (pid: 64, threadinfo=efd00000 task=efcb5590)
Stack: <0>00000010 b03a9508 efcb5590 e3ced000 00000000 b02129c4 00011200 00000000
b01464aa 00000001 ef25b76c cbf9e094 ee47e7fc b03a9508 ee47e7fc 00000001
ee47e80c b020526c 00000010 cbf9e094 ee47e7fc b0208277 00000010 00000001
Call Trace:
[<b02129c4>] cfq_set_request+0x54/0x1f0
[<b01464aa>] mempool_alloc+0x2a/0xe0
[<b020526c>] elv_set_request+0x3c/0x50
[<b0208277>] get_request+0x247/0x2b0
[<b02082fb>] get_request_wait+0x1b/0x120
[<b0208f4d>] __make_request+0x9d/0x420
[<f0ba08f5>] xor_block+0xc5/0xe0 [xor]
[<b0209437>] generic_make_request+0xe7/0x160
[<f0baee96>] handle_stripe+0x12c6/0x1470 [raid5]
[<f0bacc79>] raid5_build_block+0x29/0x90 [raid5]
[<f0bac3f5>] init_stripe+0x125/0x150 [raid5]
[<f0baf67f>] make_request+0x28f/0x300 [raid5]
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b0209437>] generic_make_request+0xe7/0x160
[<b01604ba>] cache_alloc_refill+0x1da/0x240
[<b0209500>] submit_bio+0x50/0xe0
[<b0168f29>] bio_alloc_bioset+0x89/0x170
[<b01687ce>] submit_bh+0x13e/0x190
[<b0166cb4>] __block_write_full_page+0x204/0x370
[<b01c09f0>] ext2_get_block+0x0/0x370
[<b01685f9>] block_write_full_page+0xe9/0x100
[<b01c09f0>] ext2_get_block+0x0/0x370
[<b014c0f1>] pageout+0xc1/0x140
[<b014c1fe>] remove_mapping+0x8e/0xb0
[<b014c411>] shrink_list+0x1f1/0x410
[<b014b075>] __pagevec_release+0x15/0x20
[<b014cd6d>] refill_inactive_zone+0x39d/0x420
[<b014c7a3>] shrink_cache+0xb3/0x2e0
[<b014bdf9>] shrink_slab+0x99/0x1e0
[<b0149475>] throttle_vm_writeout+0x35/0x70
[<b014ce94>] shrink_zone+0xa4/0xd0
[<b014d39f>] balance_pgdat+0x28f/0x3e0
[<b014d5cd>] kswapd+0xdd/0x130
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b0102d52>] ret_from_fork+0x6/0x14
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b014d4f0>] kswapd+0x0/0x130
[<b01011fd>] kernel_thread_helper+0x5/0x18
Code: e8 93 3a b0 89 4a 04 89 97 2c 01 00 00 e8 41 8a 12 00 89 de 89 f0 5a 5b 5e
5f 5d c3 b8 e8 93 3a b0 e8 7d 87 12 00 8b 53 04 8b 03 <89> 50 04 89 02 b8 e8 93
3a b0 c7 03 00 01 10 00 c7 43 04 00 02
<6>note: kswapd0[64] exited with preempt_count 1
Unable to handle kernel paging request at virtual address 00100100
printing eip:
b0211ac9
*pde = 00000000
Oops: 0000 [#3]
PREEMPT SMP
Modules linked in: sata_mv libata raid5 xor snd_pcm_oss snd_pcm snd_timer
snd_page_alloc snd_mixer_oss snd soundcore edd pl2303 usbserial usblp usbhid
evdev joydev sg sr_mod ide_cd cdrom af_packet ohci_hcd sworks_agp agpgart e100
mii i2c_piix4 i2c_core usbcore sd_mod dm_mod scsi_mod
CPU: 1
EIP: 0060:[<b0211ac9>] Not tainted VLI
EFLAGS: 00010096 (2.6.16-git4 #1)
EIP is at cfq_exit_io_context+0x29/0x50
eax: ef25b7e4 ebx: 00100100 ecx: ef25b540 edx: ef25b48c
esi: ef25b208 edi: 00000286 ebp: 0000000b esp: efd018f4
ds: 007b es: 007b ss: 0068
Process kswapd0 (pid: 64, threadinfo=efd00000 task=efcb5590)
Stack: <0>efd00000 00000292 b1ac0480 b0209f16 b19acba0 efcb5590 efcb5a40 b0124ea5
b035d520 efcb5734 00000040 00000001 00000001 efd00000 00000000 ffffffff
0000000b b01041b3 b037494a b035c2cd 00000002 00000002 00000202 efd019d4
Call Trace:
[<b0209f16>] exit_io_context+0x86/0xa0
[<b0124ea5>] do_exit+0x295/0x410
[<b01041b3>] die+0x193/0x1a0
[<b01185e0>] do_page_fault+0x0/0x527
[<b01185e0>] do_page_fault+0x0/0x527
[<b0118973>] do_page_fault+0x393/0x527
[<b01185e0>] do_page_fault+0x0/0x527
[<b010399b>] error_code+0x4f/0x54
[<b0212078>] cfq_get_io_context+0xd8/0x1a0
[<b02129c4>] cfq_set_request+0x54/0x1f0
[<b01464aa>] mempool_alloc+0x2a/0xe0
[<b020526c>] elv_set_request+0x3c/0x50
[<b0208277>] get_request+0x247/0x2b0
[<b02082fb>] get_request_wait+0x1b/0x120
[<b0208f4d>] __make_request+0x9d/0x420
[<f0ba08f5>] xor_block+0xc5/0xe0 [xor]
[<b0209437>] generic_make_request+0xe7/0x160
[<f0baee96>] handle_stripe+0x12c6/0x1470 [raid5]
[<f0bacc79>] raid5_build_block+0x29/0x90 [raid5]
[<f0bac3f5>] init_stripe+0x125/0x150 [raid5]
[<f0baf67f>] make_request+0x28f/0x300 [raid5]
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b0209437>] generic_make_request+0xe7/0x160
[<b01604ba>] cache_alloc_refill+0x1da/0x240
[<b0209500>] submit_bio+0x50/0xe0
[<b0168f29>] bio_alloc_bioset+0x89/0x170
[<b01687ce>] submit_bh+0x13e/0x190
[<b0166cb4>] __block_write_full_page+0x204/0x370
[<b01c09f0>] ext2_get_block+0x0/0x370
[<b01685f9>] block_write_full_page+0xe9/0x100
[<b01c09f0>] ext2_get_block+0x0/0x370
[<b014c0f1>] pageout+0xc1/0x140
[<b014c1fe>] remove_mapping+0x8e/0xb0
[<b014c411>] shrink_list+0x1f1/0x410
[<b014b075>] __pagevec_release+0x15/0x20
[<b014cd6d>] refill_inactive_zone+0x39d/0x420
[<b014c7a3>] shrink_cache+0xb3/0x2e0
[<b014bdf9>] shrink_slab+0x99/0x1e0
[<b0149475>] throttle_vm_writeout+0x35/0x70
[<b014ce94>] shrink_zone+0xa4/0xd0
[<b014d39f>] balance_pgdat+0x28f/0x3e0
[<b014d5cd>] kswapd+0xdd/0x130
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b0102d52>] ret_from_fork+0x6/0x14
[<b01366c0>] autoremove_wake_function+0x0/0x50
[<b014d4f0>] kswapd+0x0/0x130
[<b01011fd>] kernel_thread_helper+0x5/0x18
Code: 00 00 57 56 89 c6 53 9c 5f fa b8 e8 93 3a b0 e8 3e 8d 12 00 8b 1e 8b 03 0f
18 00 90 39 f3 74 15 89 f6 89 d8 e8 b9 fe ff ff 8b 1b <8b> 03 0f 18 00 90 39 f3
75 ed 89 f0 e8 a6 fe ff ff b8 e8 93 3a
<1>Fixing recursive fault but reboot is needed!
next reply other threads:[~2006-03-28 0:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-28 0:51 Mark Lord [this message]
2006-03-29 8:16 ` 2.6.16-git4: kernel BUG at block/ll_rw_blk.c:3497 Jens Axboe
2006-03-29 8:27 ` Al Viro
2006-03-29 9:08 ` Jens Axboe
2006-03-29 13:52 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44288882.4020809@rtr.ca \
--to=lkml@rtr.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.