From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jim Gifford Date: Thu, 30 Mar 2006 05:25:38 +0000 Subject: Re: SCSI Hard Drive Issues Netra Message-Id: <442B6BD2.9090503@jg555.com> List-Id: References: <442B3557.6090300@jg555.com> In-Reply-To: <442B3557.6090300@jg555.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org Jim Gifford wrote: > Since I tried working with 2.6.16 and 2.6.16.1, when I attempt to > mount my scsi disks, I get invalid disk label. Switch back to > 2.6.15.x, and the problem goes away. Any ideas suggestions, I'm stuck > at this point to figure out what's wrong. Any help will be appreciated. > OK, here's what I've been able to find out about the issue investigating it a lot further. Some reason it's saying my drives have an improper checksum(See error message below). I'm doing a build on my X1 to see if the issue also exists. root:~# fdisk /dev/sda Detected sun disklabel with wrong checksum. Probably you'll have to set all the values, e.g. heads, sectors, cylinders and partitions or force a fresh label (s command in main menu) -- ---- Jim Gifford maillist@jg555.com