From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from galahad.ideasonboard.com ([185.26.127.97]:42651 "EHLO galahad.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752813AbeDCVih (ORCPT ); Tue, 3 Apr 2018 17:38:37 -0400 From: Laurent Pinchart To: Niklas =?ISO-8859-1?Q?S=F6derlund?= Cc: Hans Verkuil , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org, tomoharu.fukawa.eb@renesas.com, Kieran Bingham Subject: Re: [PATCH v13 27/33] rcar-vin: add chsel information to rvin_info Date: Wed, 04 Apr 2018 00:38:45 +0300 Message-ID: <4430383.ZA3TeIRKqE@avalon> In-Reply-To: <20180326214456.6655-28-niklas.soderlund+renesas@ragnatech.se> References: <20180326214456.6655-1-niklas.soderlund+renesas@ragnatech.se> <20180326214456.6655-28-niklas.soderlund+renesas@ragnatech.se> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="iso-8859-1" Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: Hi Niklas, Thank you for the patch. On Tuesday, 27 March 2018 00:44:50 EEST Niklas S=F6derlund wrote: > Each Gen3 SoC has a limited set of predefined routing possibilities for > which CSI-2 device and channel can be routed to which VIN instance. > Prepare to store this information in the struct rvin_info. >=20 > Signed-off-by: Niklas S=F6derlund > Reviewed-by: Hans Verkuil Reviewed-by: Laurent Pinchart > --- >=20 > * Changes since v11 > - Fixed spelling. > - Reorderd filed order in struct rvin_group_route. > - Renamed chan to channel in struct rvin_group_route. > --- > drivers/media/platform/rcar-vin/rcar-vin.h | 42 ++++++++++++++++++++++++= +++ > 1 file changed, 42 insertions(+) >=20 > diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h > b/drivers/media/platform/rcar-vin/rcar-vin.h index > cf5c467d45e10847..93eb40856b866117 100644 > --- a/drivers/media/platform/rcar-vin/rcar-vin.h > +++ b/drivers/media/platform/rcar-vin/rcar-vin.h > @@ -43,6 +43,14 @@ enum model_id { > RCAR_GEN3, > }; >=20 > +enum rvin_csi_id { > + RVIN_CSI20, > + RVIN_CSI21, > + RVIN_CSI40, > + RVIN_CSI41, > + RVIN_CSI_MAX, > +}; > + > /** > * STOPPED - No operation in progress > * RUNNING - Operation in progress have buffers > @@ -79,12 +87,45 @@ struct rvin_graph_entity { > unsigned int sink_pad; > }; >=20 > +/** > + * struct rvin_group_route - describes a route from a channel of a > + * CSI-2 receiver to a VIN > + * > + * @csi: CSI-2 receiver ID. > + * @channel: Output channel of the CSI-2 receiver. > + * @vin: VIN ID. > + * @mask: Bitmask of the different CHSEL register values that > + * allow for a route from @csi + @chan to @vin. > + * > + * .. note:: > + * Each R-Car CSI-2 receiver has four output channels facing the VIN > + * devices, each channel can carry one CSI-2 Virtual Channel (VC). > + * There is no correlation between channel number and CSI-2 VC. It's > + * up to the CSI-2 receiver driver to configure which VC is output > + * on which channel, the VIN devices only care about output channels. > + * > + * There are in some cases multiple CHSEL register settings which would > + * allow for the same route from @csi + @channel to @vin. For example > + * on R-Car H3 both the CHSEL values 0 and 3 allow for a route from > + * CSI40/VC0 to VIN0. All possible CHSEL values for a route need to be > + * recorded as a bitmask in @mask, in this example bit 0 and 3 should > + * be set. > + */ > +struct rvin_group_route { > + enum rvin_csi_id csi; > + unsigned int channel; > + unsigned int vin; > + unsigned int mask; > +}; > + > /** > * struct rvin_info - Information about the particular VIN implementation > * @model: VIN model > * @use_mc: use media controller instead of controlling subdevice > * @max_width: max input width the VIN supports > * @max_height: max input height the VIN supports > + * @routes: list of possible routes from the CSI-2 recivers to > + * all VINs. The list mush be NULL terminated. > */ > struct rvin_info { > enum model_id model; > @@ -92,6 +133,7 @@ struct rvin_info { >=20 > unsigned int max_width; > unsigned int max_height; > + const struct rvin_group_route *routes; > }; >=20 > /** =2D-=20 Regards, Laurent Pinchart