From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <443295C2.4060504@domain.hid>
Date: Tue, 04 Apr 2006 11:50:26 -0400
From: Randy Smith <rsmith@domain.hid>
MIME-Version: 1.0
Subject: Re: [Xenomai-help] Xenomai on PPC
References: <CC692F5386B0AA47A62B7484A7CA2B6D027A2D87@domain.hid>
In-Reply-To: <CC692F5386B0AA47A62B7484A7CA2B6D027A2D87@domain.hid>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: xenomai@xenomai.org

See below...

Behre, Frederik - LT wrote:
>
> Hello
>
> I have following Problem when I Build my uImage from my kernel.
>
> But first my configuration
>
> Host system:
> ix86
> Suse Linux 10.0 32bit
>
> Cross Compiler
> Denx eldk ver. 3.11
> (_www.denx.de_ <file://www.denx.de>)
>
> Target System
> PPC (MPC8270) on Microsys PM827 Board.
> linuxppc_2_4_devel-2005-10-25-1440
> xenomai-2.1
> adeos-ipipe-2.4.25-ppc-denx-1.0-03.patch
>
> I did following Steps
>
> installing the eldk
> export Path to the Cross compiler to system Path
> extrakt linux and xenomai
> copy adeos
>
> THEN
> >./xenomai-2.1.0/scripts/prepare-kernel.sh --arch=powerpc \
>         --adeos=adeos-ipipe-2.4.25-ppc-denx-1.0-03patch  \
>         --linux=linuxppc_2_4_devel-2005-10-25-1440/
> patching file arch/ppc/config.in
> patching file arch/ppc/kernel/Makefile
> patching file arch/ppc/kernel/entry.S
> patching file arch/ppc/kernel/head.S
> patching file arch/ppc/kernel/head_440.S
> patching file arch/ppc/kernel/head_44x.S
> patching file arch/ppc/kernel/head_4xx.S
> patching file arch/ppc/kernel/head_8xx.S
> patching file arch/ppc/kernel/head_e500.S
> patching file arch/ppc/kernel/idle.c
> patching file arch/ppc/kernel/ipipe-core.c
> patching file arch/ppc/kernel/ipipe-root.c
> patching file arch/ppc/kernel/irq.c
> patching file arch/ppc/kernel/ppc_ksyms.c
> patching file arch/ppc/kernel/traps.c
> patching file arch/ppc/mm/fault.c
> patching file include/asm-ppc/hw_irq.h
> patching file include/asm-ppc/ipipe.h
> patching file include/asm-ppc/mmu_context.h
> patching file include/asm-ppc/system.h
> patching file include/linux/ipipe.h
> patching file include/linux/sched.h
> patching file init/main.c
> patching file kernel/Makefile
> patching file kernel/exit.c
> patching file kernel/fork.c
> patching file kernel/ipipe/Makefile
> patching file kernel/ipipe/core.c
> patching file kernel/ipipe/generic.c
> patching file kernel/printk.c
> patching file kernel/sched.c
> patching file kernel/signal.c
>
> # I think I is ok ???
>
> >cd linuxppc_2_4_devel-2005-10-25-1440
> >make ARCH=ppc CROSS_COMPILE=ppc_82xx- PM825config
> /bin/sh: ppc-82xx-gcc: command not found
> make: *** No rule to make target `PM825config'.  Stop.
>

Make sure that you use something like

${CROSS_COMPILE}make instead of just make.  It looks as if your are 
picking up your host's make and it is confused.