From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rani Ahmed Date: Thu, 20 Apr 2006 08:38:25 +0000 Subject: Re: [LARTC] Shaping per IP in PPPoE borrowing or sharing Uplink or Message-Id: <44474881.7010100@idm.net.lb> List-Id: References: <443FB946.6050205@idm.net.lb> In-Reply-To: <443FB946.6050205@idm.net.lb> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org thanks for your help. but i am not that much used to tc. i use tcng. so how should i write that in tcng? Anton Glinkov wrote: >If they are all on the same ethernet device, you can match them with: >tc filter add dev ${DEVICE} parent 1: protocol all u32 \ >match u16 0x8864 0xFFFF at -2 flowid 1:${ID} > >8864 is the PPP session ethernet protocol > >you can play around with u32 if you want to match tos or ports and stuff.. > > > >>helo again. I think this question i am asking is worth: >> >>we know that pppoe-server creates a pppX device on each connection done >>to it. >>So, when i have to shape, i have to shape each pppX connection device on >>itself alone. >>What i know is that the borrowing method on one device by itself, e.g. >>ppp0, alone using HTB or the like. this means that i have to create for >>another device, e.g. ppp1, its own HTB or CBQ tree. >> >>So, how can i in PPPoE technology setup sharing or borrowing between all >>the pppX devices so it won't let network starvation problem float on >>surface? >> >>Thanks. >> >> >> > > > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc