Re: Issues with sata_nv and 2 disks under 2.6.16 and 2.6.17-rc2

[Emmanuel Fleury <emmanuel.fleury@labri.fr>]

Hi,

Roger Heflin wrote:
>>
>> ata1: command 0xc8 timeout, stat 0x50 host_stat 0x24
>> ata1: status=0x50 { DriveReady SeekComplete }
>> sda: Current: sense key: No Sense
>>     Additional sense: No additional sense information
>> Info fld=0x3481ff
>> ata2: command 0xc8 timeout, stat 0x50 host_stat 0x24
>> ata2: status=0x50 { DriveReady SeekComplete }
>> sdb: Current: sense key: No Sense
>>     Additional sense: No additional sense information
>> Info fld=0x166ff
>> ata1: command 0xc8 timeout, stat 0x50 host_stat 0x24
>> ata1: status=0x50 { DriveReady SeekComplete }
>> sda: Current: sense key: No Sense
>>     Additional sense: No additional sense information
>> Info fld=0x3482ff
>> ata2: command 0xc8 timeout, stat 0x50 host_stat 0x24
>> ata2: status=0x50 { DriveReady SeekComplete }
>> sdb: Current: sense key: No Sense
>>     Additional sense: No additional sense information
>> Info fld=0x167ff
>> ata1: command 0xca timeout, stat 0x50 host_stat 0x24
>> ata1: status=0x50 { DriveReady SeekComplete }

Can you try to set the following config options as module:

Device Drivers  --->
  SCSI device support  --->
    SCSI low-level drivers  --->
      AHCI SATA support

And

Device Drivers  --->
  SCSI device support  --->
    SCSI low-level drivers  --->
      NVIDIA SATA support

Regards
-- 
Emmanuel Fleury              | Office: 211
Associate Professor,         | Phone: +33 (0)5 40 00 35 24
LaBRI, Domaine Universitaire | Fax:   +33 (0)5 40 00 66 69
351, Cours de la Libération  | email: emmanuel.fleury@labri.fr
33405 Talence Cedex, France  | URL: http://www.labri.fr/~fleury