From: "Jan Beulich" <jbeulich@novell.com>
To: "Kristen Accardi" <kristen.c.accardi@intel.com>
Cc: <pcihpd-discuss@lists.sourceforge.net>, <linux-kernel@vger.kernel.org>
Subject: Re: [Pcihpd-discuss] [PATCH] correct pciehp init recovery
Date: Tue, 02 May 2006 12:32:20 +0200 [thread overview]
Message-ID: <44575154.76E4.0078.0@novell.com> (raw)
In-Reply-To: <1146245903.25490.10.camel@whizzy>
>>> Kristen Accardi <kristen.c.accardi@intel.com> 28.04.06 19:38 >>>
>On Fri, 2006-04-28 at 16:59 +0200, Jan Beulich wrote:
>> Clean up the recovery path from errors during pcie_init().
>>
>It's possible that this driver never actually requested an irq if was in
>poll mode. Then you will call free_irq, when what you really want to do
>is kill the timer that may have been started.
Thanks for pointing this out, here's the updated patch:
Clean up the recovery path from errors during pcie_init().
Signed-off-by: Jan Beulich <jbeulich@novell.com>
--- /home/jbeulich/tmp/linux-2.6.17-rc3/drivers/pci/hotplug/pciehp_hpc.c 2006-04-27 17:49:41.000000000 +0200
+++ 2.6.17-rc3-pciehp-init-recovery/drivers/pci/hotplug/pciehp_hpc.c 2006-04-28 09:20:55.000000000 +0200
@@ -1474,7 +1474,7 @@ int pcie_init(struct controller * ctrl,
rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_free_irq;
}
intr_enable = intr_enable | PRSN_DETECT_ENABLE;
@@ -1500,19 +1500,19 @@ int pcie_init(struct controller * ctrl,
rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_free_irq;
}
rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
if (rc) {
err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_disable_intr;
}
temp_word = 0x1F; /* Clear all events */
rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
if (rc) {
err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
- goto abort_free_ctlr;
+ goto abort_disable_intr;
}
if (pciehp_force) {
@@ -1521,7 +1521,7 @@ int pcie_init(struct controller * ctrl,
} else {
rc = pciehp_get_hp_hw_control_from_firmware(ctrl->pci_dev);
if (rc)
- goto abort_free_ctlr;
+ goto abort_disable_intr;
}
/* Add this HPC instance into the HPC list */
@@ -1548,6 +1548,21 @@ int pcie_init(struct controller * ctrl,
return 0;
/* We end up here for the many possible ways to fail this API. */
+abort_disable_intr:
+ rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ if (!rc) {
+ temp_word &= ~(intr_enable | HP_INTR_ENABLE);
+ rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ }
+ if (rc)
+ err("%s : disabling interrupts failed\n", __FUNCTION__);
+
+abort_free_irq:
+ if (pciehp_poll_mode)
+ del_timer_sync(&php_ctlr->int_poll_timer);
+ else
+ free_irq(php_ctlr->irq, ctrl);
+
abort_free_ctlr:
pcie_cap_base = saved_cap_base;
kfree(php_ctlr);
next prev parent reply other threads:[~2006-05-02 10:31 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-28 14:59 [PATCH] correct pciehp init recovery Jan Beulich
2006-04-28 17:38 ` [Pcihpd-discuss] " Kristen Accardi
2006-05-02 10:32 ` Jan Beulich [this message]
2006-05-09 7:49 ` Andrew Morton
2006-05-09 8:29 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44575154.76E4.0078.0@novell.com \
--to=jbeulich@novell.com \
--cc=kristen.c.accardi@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pcihpd-discuss@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.