From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brecht Hoflack Subject: Re: dosemu -t problem Date: Mon, 08 May 2006 17:22:30 +0200 Message-ID: <445F6236.9070600@melexis.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Sender: linux-msdos-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-msdos@vger.kernel.org Clarence Dang wrote: > On Friday 05 May 2006 23:54, Brecht Hoflack wrote: > >> i am using DOSEMU 1.3.3 with direct hardware graphics. When i call >> dosemu with the dosemu -t command the direct graphics don't seem to >> work. >> > > dosemu -s > I was actually using dosemu -s -t. When trying to do this in a Xterm the graphical part is not working (probably caused by the -t switch). So how can i run run Dosemu in X without starting XDosemu (and without using the -t switch). > >> Also the Break is mapped as Control X C instead of the Control >> Break sequence. Does somebody have an idea what may cause this error? >> > > Make sure $_rawkeyboard = (1). I think dosemu -s covers that these days > though but you should check. > It was already configured this way. Control Break does not work using the -t switch however. > >> I would like to use the -t switch to use the terminal version of Dosemu. >> > > dosemu -t is only for text in consoles. Useful for xterm's with scrollable > history. > - > To unsubscribe from this list: send the line "unsubscribe linux-msdos" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > >