Dear all

1) The problem is fixed as i was loading the wrong snd-usb-audio (sorry) 
: the one coming with the kernel and not the one with the patch (sorry 
again). Now it works , thanks !!!

2) Then i had problems with lirc, as i have to define a new lircd.conf 
with my RM1500 remote control, the one delivered with lirc was not 
working. I did it using irrecord and at the moment defined only few buttons

I have attached the file for those who would be interested. It works 
with mplayer ( at least vol + and vol-) . I will complete and distribute 
it in few days.

3) the last problem i have is for recording with the live 24!! but i 
will post a new mail
best regards
JP


#
# this config file was automatically generated
# using lirc-0.6.6(serial) on Mon Jan 12 17:28:59 2004
#
# contributed by: Michael Plugge <firefox2501@hotmail.com>
#
# brand: Creative
# model no. of remote control: RM-1500
# devices being controlled by this remote: Audigy 2 NX
#
# This remote comes with the SoundBlaster Audigy 2 NX USB sound card. 
This file
# was created using a home brew serial receiver. I am not sure if the IR
# reciever that is built into the Audigy 2 NX will work.
#

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.0(alsa_usb) on Mon May 8 18:38:35 2006
#
# contributed by
#
# brand: toto
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

name toto
bits 8
eps 30
aeps 100

one 0 0
zero 0 0
gap 315848
min_repeat 1
toggle_bit 0


begin codes
vol- 0x9C
vol+ 0x9D
mute 0x91
up 0x84
down 0x72
next 0x8A
prev 0x78
end codes

end remote




Clemens Ladisch a e'crit:

>(please don't top-post)
>
>vitton.laforest wrote:
>  
>
>>Clemens Ladisch a e'crit:
>>    
>>
>>>jpv wrote:
>>>      
>>>
>>>>Impossible to get the remote control working with my Live 24 external even
>>>>with the patch.
>>>>
>>>>No device corresponding to the remote control.
>>>>and nothing in /proc/asound/hwdep 
>>>>        
>>>>
>>>What are the contents of /proc/asound/cards?
>>>      
>>>
>> 0 [External       ]: USB-Audio - SB Live! 24-bit External
>>                      Creative Technology SB Live! 24-bit External at usb-0000:00:02.3-3, full speed
>> 1 [SI7012         ]: ICH - SiS SI7012
>>                      SiS SI7012 with CMI9738 at 0xdc00, irq 10
>> 2 [ALS4000        ]: ALS4000 - Avance Logic ALS4000
>>                      Avance Logic ALS4000 at 0xd400, irq 11
>>    
>>
>
>So the driver is loaded correctly.
>
>What is the output of lsusb?
>
>Did you unload and reload all sound modules after patching and
>recompiling the driver?
>
>
>Regards,
>Clemens
>
>
>  
>