From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gianpaolo Lopresti Subject: Pentium M 740 (Sonoma) Date: Tue, 09 May 2006 12:19:09 +0200 Message-ID: <44606C9D.2030309@email.it> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" To: cpufreq@lists.linux.org.uk Hi, i'm Italian, and so sorry for my english... I have noted that in the speedstep-centrino.c there is not the support for the pentium M 740 (Family 6, Model 13, stepping 8), that is the centrino with 533Mhz FSB. I think that this is one of the most popular centrino, because, practically at same price of a 400Mhz fsb processor, you can have a 533Mhz Processor. I wrote to make you known that, on Internet, there are a lot of implementation of speedstep-centrino.c that support this processor: one is at http://pdis.rnw.nl/~hansl/linux/nc6230/speedstep-centrino.c I found this link by the address: http://pdis.rnw.nl/~hansl/linux/nc6230/index_nc6230.html I don't know if it work or not (i do not trust unofficial versions...), but, if it works, it's possible that this version will become an Official version (or that the 6,13,8 processor will be supported by cpufreq)? Thanks for your attention, Gianpaolo Lopresti -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Prova GRATIS per 15 giorni! DVDNetRent e ricevi a casa 3 film. Puoi scegliere tra migliaia di titoli Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=4632&d=9-5