From mboxrd@z Thu Jan  1 00:00:00 1970
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon, 31 Mar 2014 23:38:55 +0000
Subject: Re: [PATCH] clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1
Message-Id: <4462943.69SJXTNJdI@avalon>
List-Id: <linux-sh.vger.kernel.org>
References: <1396277434-24925-1-git-send-email-ben.dooks@codethink.co.uk>
In-Reply-To: <1396277434-24925-1-git-send-email-ben.dooks@codethink.co.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sh@vger.kernel.org

Hi Mike,

On Monday 31 March 2014 11:13:10 Mike Turquette wrote:
> Quoting Ben Dooks (2014-03-31 07:50:34)
> 
> > The clock generator for rcar-gen2 has the lb, sdh, sd0 and sd1 clocks
> > parented to pll1_div2 where the hardware diagram shows these to be
> > directly fed from pll1.
> > 
> > This fixes the initial rate for sdh0 clock to be 97.5MHz instead of
> > the reported 48MHz where the manual says the default register values
> > are for 97.5MHz.
> > 
> > Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> 
> Taken into clk-next.

I'm glad to see the clock patches being applied quickly, but it would make 
sense to wait at least a couple of days for acks or nacks :-) In this case the 
patch looks good to me, so there's no issue.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> > ---
> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> > Cc: Mike Turquette <mturquette@linaro.org>
> > Cc: linux-sh@vger.kernel.org
> > Cc: Simon Horman <horms+renesas@verge.net.au>
> > ---
> > 
> >  drivers/clk/shmobile/clk-rcar-gen2.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c
> > b/drivers/clk/shmobile/clk-rcar-gen2.c index 01cb49c..7c6be44 100644
> > --- a/drivers/clk/shmobile/clk-rcar-gen2.c
> > +++ b/drivers/clk/shmobile/clk-rcar-gen2.c
> > @@ -249,22 +249,22 @@ rcar_gen2_cpg_register_clock(struct device_node *np,
> > struct rcar_gen2_cpg *cpg,> 
> >                 parent_name = "main";
> >                 mult = config->pll3_mult;
> >         
> >         } else if (!strcmp(name, "lb")) {
> > 
> > -               parent_name = "pll1_div2";
> > +               parent_name = "pll1";
> > 
> >                 div = cpg_mode & BIT(18) ? 36 : 24;
> >         
> >         } else if (!strcmp(name, "qspi")) {
> >         
> >                 parent_name = "pll1_div2";
> >                 div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) = BIT(2)
> >                 
> >                     ? 8 : 10;
> >         
> >         } else if (!strcmp(name, "sdh")) {
> > 
> > -               parent_name = "pll1_div2";
> > +               parent_name = "pll1";
> > 
> >                 table = cpg_sdh_div_table;
> >                 shift = 8;
> >         
> >         } else if (!strcmp(name, "sd0")) {
> > 
> > -               parent_name = "pll1_div2";
> > +               parent_name = "pll1";
> > 
> >                 table = cpg_sd01_div_table;
> >                 shift = 4;
> >         
> >         } else if (!strcmp(name, "sd1")) {
> > 
> > -               parent_name = "pll1_div2";
> > +               parent_name = "pll1";
> > 
> >                 table = cpg_sd01_div_table;
> >                 shift = 0;
> >         
> >         } else if (!strcmp(name, "z")) {

-- 
Regards,

Laurent Pinchart