From: Michael Reed <mdr@sgi.com>
To: linux-scsi <linux-scsi@vger.kernel.org>
Subject: [PATCH 5/6] mpt fusion - abort of board reset leaves port dead requiring reboot
Date: Thu, 18 May 2006 15:00:32 -0500 [thread overview]
Message-ID: <446CD260.7040703@sgi.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 382 bytes --]
The driver uses msleep_interruptible() in the code path responsible
for resetting the card's ports via the lsiutil command. If a
<ctrl-c> is received during the reset it can leave a port in such
a state that the only way to regain its use is to reboot the system.
Changing from msleep_interruptible() to msleep() corrects the problem.
Signed-off-by: Michael Reed <mdr@sgi.com>
[-- Attachment #2: 05-mptfc_msleep.patch --]
[-- Type: text/x-patch, Size: 3948 bytes --]
The driver uses msleep_interruptible() in the code path responsible
for resetting the card's ports via the lsiutil command. If a
<ctrl-c> is received during the reset it can leave a port in such
a state that the only way to regain its use is to reboot the system.
Changing from msleep_interruptible() to msleep() corrects the problem.
Signed-off-by: Michael Reed <mdr@sgi.com>
--- rc3c/drivers/message/fusion/mptbase.c 2006-05-08 14:55:27.276697653 -0500
+++ rc3/drivers/message/fusion/mptbase.c 2006-05-08 14:58:55.364106345 -0500
@@ -2264,7 +2264,7 @@
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1); /* 1 msec delay */
}
@@ -2652,7 +2652,7 @@
state = mpt_GetIocState(ioc, 1);
while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay(1);
}
@@ -2904,7 +2904,7 @@
/* wait 1 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1);
}
@@ -2921,7 +2921,7 @@
}
/* wait .1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
@@ -3011,7 +3011,7 @@
/* wait 1 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1);
+ msleep (1);
} else {
mdelay (1);
}
@@ -3059,7 +3059,7 @@
return 0;
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (10);
+ msleep (10);
} else {
mdelay (10);
}
@@ -3110,7 +3110,7 @@
SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
@@ -3132,7 +3132,7 @@
return hard_reset_done;
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (10);
+ msleep (10);
} else {
mdelay (10);
}
@@ -3203,7 +3203,7 @@
/* wait 100 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
@@ -3282,7 +3282,7 @@
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
@@ -3310,7 +3310,7 @@
/* wait 1 sec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (1000);
+ msleep (1000);
} else {
mdelay (1000);
}
@@ -3344,7 +3344,7 @@
/* wait 100 msec */
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible (100);
+ msleep (100);
} else {
mdelay (100);
}
@@ -3438,7 +3438,7 @@
}
if (sleepFlag == CAN_SLEEP) {
- msleep_interruptible(1);
+ msleep(1);
} else {
mdelay (1); /* 1 msec delay */
}
@@ -3878,7 +3878,7 @@
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
break;
- msleep_interruptible (1);
+ msleep (1);
count++;
}
} else {
@@ -3927,7 +3927,7 @@
intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
break;
- msleep_interruptible(1);
+ msleep(1);
count++;
}
} else {
--- rc3c/drivers/message/fusion/mptfc.c 2006-05-08 14:55:38.828222127 -0500
+++ rc3/drivers/message/fusion/mptfc.c 2006-05-08 14:58:58.911964756 -0500
@@ -678,7 +678,7 @@
*/
if (pp0dest->PortState == MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN) {
if (count-- > 0) {
- msleep_interruptible(100);
+ msleep(100);
goto try_again;
}
printk(MYIOC_s_INFO_FMT "Firmware discovery not"
--- rc3c/drivers/message/fusion/mptscsih.c 2006-05-08 14:55:06.453554069 -0500
+++ rc3/drivers/message/fusion/mptscsih.c 2006-05-08 14:59:04.163755105 -0500
@@ -1922,7 +1922,7 @@
break;
}
spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- msleep_interruptible(250);
+ msleep(250);
} while (--loop_count);
return status;
next reply other threads:[~2006-05-18 20:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-18 20:00 Michael Reed [this message]
2006-05-18 22:14 ` [REPOST][PATCH 5/6] mpt fusion - abort of board reset leaves port dead requiring reboot Michael Reed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=446CD260.7040703@sgi.com \
--to=mdr@sgi.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.