From: Mark Lord <liml@rtr.ca>
To: Steven Scholz <steven.scholz@imc-berlin.de>
Cc: linux-ide@vger.kernel.org
Subject: Re: Problems with 1GB SimpleTech CF Card
Date: Wed, 24 May 2006 09:53:42 -0400 [thread overview]
Message-ID: <44746566.6040601@rtr.ca> (raw)
In-Reply-To: <447436B3.4090906@imc-berlin.de>
Steven Scholz wrote:
> Hi all,
>
> I get repeatable erros when accessing a 1GB SimpleTech CF Flash Card (SLCF1GBJ).
..
> ~ # hdparm -i /dev/hda
> Model=STI Flash 7.0.0, FwRev=05/03/04, SerialNo=STI J107004201112846
> Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
> RawCHS=2006/16/63, TrkSize=0, SectSize=0, ECCbytes=4
> BuffType=unknown, BuffSize=0kB, MaxMultSect=1, MultSect=off
> CurCHS=2006/16/63, CurSects=2022048, LBA=yes, LBAsects=2022048
> IORDY=no, tPIO={min:120,w/IORDY:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> AdvancedPM=no WriteCache=enabled
>
> When doing "mke2fs /dev/hda1" after 30 seconds I get
>
> hda: irq timeout: status=0xd0 { Busy }
> ide: failed opcode was: unknown
> ide0: reset: master: error (0x00?)
Mmmm.. No idea, but one thing to try is "hdparm -W0" on the card,
and see if that makes any difference.
Cheers
next prev parent reply other threads:[~2006-05-24 13:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-24 10:34 Problems with 1GB SimpleTech CF Card Steven Scholz
2006-05-24 13:53 ` Mark Lord [this message]
2006-05-24 14:03 ` Steven Scholz
-- strict thread matches above, loose matches on Subject: below --
2006-05-24 12:28 Raphael Bossek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44746566.6040601@rtr.ca \
--to=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
--cc=steven.scholz@imc-berlin.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.