From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Linux MIPS <linux-mips@linux-mips.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>, ralf@linux-mips.org
Subject: Re: [PATCH] Save write-only Config.OD from being clobbered
Date: Fri, 26 May 2006 07:43:53 +0400 [thread overview]
Message-ID: <44767979.6020106@ru.mvista.com> (raw)
In-Reply-To: <442457A6.4080508@dev.rtsoft.ru>
[-- Attachment #1: Type: text/plain, Size: 356 bytes --]
Hello.
Save the Config.OD bit from being clobbered by coherency_setup(). This
bit, when set, fixes various errata in the early steppings of Au1x00 SOCs.
Unfortunately, the bit was write-only on the most early of them. In addition,
also restore the bit after a wakeup from sleep.
WBR, Sergei
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[-- Attachment #2: Au1x00-retain-OD-bit.patch --]
[-- Type: text/plain, Size: 1779 bytes --]
Index: linux-mips/arch/mips/au1000/common/sleeper.S
===================================================================
--- linux-mips.orig/arch/mips/au1000/common/sleeper.S
+++ linux-mips/arch/mips/au1000/common/sleeper.S
@@ -112,6 +112,11 @@ sdsleep:
mtc0 k0, CP0_PAGEMASK
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
+
+ /* We need to catch the ealry Alchemy SOCs with
+ * the write-only Config[OD] bit and set it back to one...
+ */
+ jal au1x00_fixup_config_od
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
Index: linux-mips/arch/mips/mm/c-r4k.c
===================================================================
--- linux-mips.orig/arch/mips/mm/c-r4k.c
+++ linux-mips/arch/mips/mm/c-r4k.c
@@ -1136,6 +1136,26 @@ static void __init setup_scache(void)
c->options |= MIPS_CPU_SUBSET_CACHES;
}
+void au1x00_fixup_config_od(void)
+{
+ /*
+ * c0_config.od (bit 19) was write only (and read as 0)
+ * on the early revisions of Alchemy SOCs. It disables the bus
+ * transaction overlapping and needs to be set to fix various errata.
+ */
+ switch (current_cpu_data.cputype) {
+ case CPU_AU1000: /* rev. DA, HA, HB */
+ case CPU_AU1100: /* rev. AB, BA, BC ?? */
+ if ((read_c0_prid() & 0xff) < 3)
+ set_c0_config(1 << 19);
+ break;
+ case CPU_AU1500: /* rev. AB */
+ if ((read_c0_prid() & 0xff) < 1)
+ set_c0_config(1 << 19);
+ break;
+ }
+}
+
static inline void coherency_setup(void)
{
change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
@@ -1156,6 +1176,13 @@ static inline void coherency_setup(void)
case CPU_R4400MC:
clear_c0_config(CONF_CU);
break;
+ default:
+ /*
+ * We need to catch the ealry Alchemy SOCs with
+ * the write-only co_config.od bit and set it back to one...
+ */
+ au1x00_fixup_config_od();
+ break;
}
}
next prev parent reply other threads:[~2006-05-26 3:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-22 20:59 [PATCH] Retain the write-only OD from being clobbered Jordan Crouse
2005-11-22 21:10 ` Sergei Shtylylov
2005-12-28 22:25 ` Sergei Shtylylov
2006-03-24 20:33 ` Sergei Shtylyov
2006-05-26 3:43 ` Sergei Shtylyov [this message]
2006-05-26 15:44 ` [PATCH] Save write-only Config.OD from being clobbered (take 4) Sergei Shtylyov
2006-05-26 15:55 ` Martin Michlmayr
2006-05-26 16:02 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44767979.6020106@ru.mvista.com \
--to=sshtylyov@ru.mvista.com \
--cc=jordan.crouse@amd.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.