From mboxrd@z Thu Jan 1 00:00:00 1970 From: phil@edgedesign.us (Philip Edelbrock) Date: Sun, 28 May 2006 21:33:40 +0000 Subject: [lm-sensors] svn resync Message-Id: <447A1734.1060007@edgedesign.us> List-Id: References: <44621B6E.6070500@sh.cvut.cz> In-Reply-To: <44621B6E.6070500@sh.cvut.cz> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > Hi all, > > [Rudolf Marek] >>> Please can you resync SVN with CVS? I think we can switch after that >>> because the commits to both repositories were quite anoying... > > [Axel Thimm] >> OK. Someone with access to the cvs repo needs to copy it over to the >> server (I have no access). Last time either Philip or Jean copied it, >> I don't remember anymore. For the migration one needs the RCS files >> (foo,v) - anonymous cvs access is not enough. >> >> Just rsync the CVS repo to devel.atrpms.net:/srv/lm-sensors.org/cvs >> (or any place else) and I'll do the syncing. > > I have no access to the CVS repository, only Philip Edelbrock has. > Phil, can you please: > * Turn the i2c, lm_sensors and lm_sensors2 modules to read-only. > * Rsync the i2c and lm_sensors2 modules to Axel's server. > > I don't think we want to copy the old lm_sensors module to the new > server, that would be a waste of time and energy. I guess we also don't > need the website module, as the new site will be handled differently. > The website module must stay active on the old CVS repository though, > as we will want to maintain the old site until the new one is fully > operational. > Oops, sorry this email slipped past me. Thanks, Rudolf, for dropping me a note today. I'm pushing the tar ball up now. Phil