From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <447E0456.10609@arcoscom.com> Date: Wed, 31 May 2006 23:02:14 +0200 From: =?UTF-8?B?U2FtdWVsIETDrWF6IEdhcmPDrWE=?= MIME-Version: 1.0 References: <447CBD31.2090802@arcoscom.com> <20060530162106.30702d1b@dxpl.pdx.osdl.net> <447D77A4.5050205@arcoscom.com> <20060531091022.12361f66@localhost.localdomain> In-Reply-To: <20060531091022.12361f66@localhost.localdomain> Content-Type: text/plain; charset="utf-8"; format="flowed" Content-Transfer-Encoding: 8bit Subject: Re: [Bridge] setportprio problem with bridge-utils 1.0.6 List-Id: Linux Ethernet Bridging List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Stephen Hemminger Cc: bridge@lists.osdl.org Thanks Stepen, again, and sorry for my english, perhaps is this the problem too: my english. I want to set port prio, to values as 1, 2, 3, 4, etc.. (little values), my problem is that when I run: brctl setportprio br0 eth1 3 That "3" goes to "port cost" no goes into "port priority", that is my problem. Any help more? Stephen Hemminger escribió: > On Wed, 31 May 2006 13:01:56 +0200 > Samuel Díaz García wrote: > >> Thanks Stephen. >> >> The problem is I want to set the port prio, not the cost. The cost is >> working (at least brctl showstp br0 shows fine, gg). >> >> Would work with ..../port_prio too? > > You know that port_prio is limited to 6 bits now that bridge can have up > to 1024 ports. > -- Samuel Díaz García Director Gerente ArcosCom Wireless, S.L.L. CIF: B11828068 c/ Romero Gago, 19 Arcos de la Frontera 11630 - Cadiz http://www.arcoscom.com mailto:samueldg@arcoscom.com msn: samueldg@arcoscom.com Móvil: 651 93 72 48 Tlfn.: 956 70 13 15 Fax: 956 70 34 83