From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Thu, 01 Jun 2006 20:46:23 +0000 Subject: Re: Fwd: [LARTC] HTB shaping & borrowing info Message-Id: <447F521F.2030704@andyfurniss.entadsl.com> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Stefano Mainardi wrote: > Hi Andy, > how i must setup the value for CBURST for my situation? Have you read? > I think the burst is too small - In your case I would just not specify either burst and let htb choose them. Andy. > Ste > > 2006/6/1, Andy Furniss : > >> >> Stefano Mainardi wrote: >> >> > tc class add dev eth1 parent 11:1 classid 11:2 htb rate 70Mbit ceil >> 70Mbit >> > burst 6k cburst 64k quantum 1600 >> >> I am not sure if it matters in this case with the big cburst - but >> remember burst * 8 * HZ will be the bit rate a class can reach. >> >> Andy. >> > > > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc