From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Chandran Date: Mon, 05 Jun 2006 08:57:24 +0000 Subject: [LARTC] Static routing with multiple interfaces Message-Id: <4483EF24.3060608@multitech.co.in> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I am facing some strange problem with multipath routing. I have set up a rule stating that any packets coming from a certain ip address <192.168.52.66> should use an interface < eth1> For this, I used the following commands /ip rule add from 192.168.52.66 table 200 ip route add default table 200 via 192.168.19.76 dev eth1/ Here 192.168.19.76 is eth1's gateway. This is how my rule structure looks /0: from all lookup local 49: from 192.168.52.66 lookup 200 50: from all lookup main 222: from all lookup 222 32766: from all lookup main 32767: from all lookup 253/ However this is not working, I have packets still going out through the other interface when sent from 192.168.51.66. This is how my default table (222) looks /default proto static nexthop via 192.168.19.76 dev eth1 weight 1 nexthop via 192.168.20.25 dev eth2 weight 1 / I dont have a default route in the main or local table. Is there something that I am missing to get the static rule working? Thanks and Regards, Vinod C _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc