From: Carl K <carl@personnelware.com>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] PM325 by LG cell phone
Date: Thu, 08 Jun 2006 03:05:10 -0500 [thread overview]
Message-ID: <4487DA36.2000102@personnelware.com> (raw)
In-Reply-To: <1149750807.27331.1.camel@localhost>
Marcel Holtmann wrote:
> Hi Carl,
>
>
>> carl@asus17:~$ sudo rfcomm connect 0 08:00:37:03:EF:36 4
>> Can't connect RFCOMM socket: Connection refused
>>
>
> run "hcidump -X -V" as root to see what's going on.
>
carl@asus17:~$ sudo hcidump -X -V
HCI sniffer - Bluetooth packet analyzer ver 1.28
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 08:00:37:03:EF:36 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 42 bdaddr 08:00:37:03:EF:36 type ACL encrypt 0x00
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 42 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 42
> HCI Event: Max Slots Change (0x1b) plen 3
handle 42 slots 5
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
MTU 1013
> ACL data: handle 42 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 675
< ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
Success
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 42 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 8 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 670 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 8 pf 0 ilen 0 fcs 0xf6
< ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 42 packets 1
> ACL data: handle 42 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 42 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 42 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 42 reason 0x16
Reason: Connection Terminated by Local Host
>
>> I am not sure I have paired. If I did, does rebooting phone or linux
>> end that 'session' ?
>>
>
> Maybe the channel numbers changed or you need to reactivate the DUN
> service.
>
how did I activate it in the first place?
ck
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2006-06-08 8:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-03 0:32 [Bluez-users] PM325 by LG cell phone Carl Karsten
2006-06-03 19:17 ` Marcel Holtmann
2006-06-03 20:39 ` Carl Karsten
2006-06-03 21:50 ` Marcel Holtmann
2006-06-06 7:15 ` Carl Karsten
2006-06-08 7:13 ` Marcel Holtmann
2006-06-08 8:05 ` Carl K [this message]
2006-06-08 10:57 ` Marcel Holtmann
2006-06-06 7:08 ` Carl Karsten
-- strict thread matches above, loose matches on Subject: below --
2006-06-08 7:14 Carl K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4487DA36.2000102@personnelware.com \
--to=carl@personnelware.com \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.