* 2.6.16.20 fails to boot on SATA system but works on IDE
@ 2006-06-16 15:49 Barry Scott
0 siblings, 0 replies; 3+ messages in thread
From: Barry Scott @ 2006-06-16 15:49 UTC (permalink / raw)
To: linux-kernel
After failing to get 2.6.17-rc6 working on a HP dc7600U I went back
to 2.6.16.20. It also fails to find any volume group during boot.
I think this might be problem with SATA as I can boot the same build on
two other systems that have IDE disks.
I get success on VIA Epia M10000 and a P4 Shuttle systems that use
IDE disks but fail on the HP dc7600U that uses a SATA disk. All three
systems use LVM2.
The Fedora build of 2.6.16 works on all three systems.
I'm going to see if there are debug messages I can turn on it libata
and md that might give more information.
Any suggestions as to what I can do to track down this problem?
Barry
^ permalink raw reply [flat|nested] 3+ messages in thread
* 2.6.16.20 fails to boot on SATA system but works on IDE
@ 2006-06-16 16:36 Barry Scott
2006-06-20 13:44 ` Barry Scott
0 siblings, 1 reply; 3+ messages in thread
From: Barry Scott @ 2006-06-16 16:36 UTC (permalink / raw)
To: linux-ide
I originally post to linux kernel dev list. But guess that this is a
more appropriate list to ask for help on.
After failing to get 2.6.17-rc6 working on a HP dc7600U I went back
to 2.6.16.20. It also fails to find any volume group during boot.
I think this might be problem with SATA as I can boot the same build on
two other systems that have IDE disks.
I get success on VIA Epia M10000 and a P4 Shuttle systems that use
IDE disks but fail on the HP dc7600U that uses a SATA disk. All three
systems use LVM2.
The Fedora build of 2.6.16 works on all three systems.
I'm going to see if there are debug messages I can turn on it libata
and md that might give more information.
Any suggestions as to what I can do to track down this problem?
Barry
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 2.6.16.20 fails to boot on SATA system but works on IDE
2006-06-16 16:36 2.6.16.20 fails to boot on SATA system but works on IDE Barry Scott
@ 2006-06-20 13:44 ` Barry Scott
0 siblings, 0 replies; 3+ messages in thread
From: Barry Scott @ 2006-06-20 13:44 UTC (permalink / raw)
Cc: linux-ide
Barry Scott wrote:
> I originally post to linux kernel dev list. But guess that this is a
> more appropriate list to ask for help on.
>
> After failing to get 2.6.17-rc6 working on a HP dc7600U I went back
> to 2.6.16.20. It also fails to find any volume group during boot.
>
> I think this might be problem with SATA as I can boot the same build on
> two other systems that have IDE disks.
>
> I get success on VIA Epia M10000 and a P4 Shuttle systems that use
> IDE disks but fail on the HP dc7600U that uses a SATA disk. All three
> systems use LVM2.
>
> The Fedora build of 2.6.16 works on all three systems.
>
> I'm going to see if there are debug messages I can turn on it libata
> and md that might give more information.
>
> Any suggestions as to what I can do to track down this problem?
>
> Barry
If this is the wrong list to ask about this problem can anyone suggest the
right place to ask?
Barry
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-06-20 13:44 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-16 16:36 2.6.16.20 fails to boot on SATA system but works on IDE Barry Scott
2006-06-20 13:44 ` Barry Scott
-- strict thread matches above, loose matches on Subject: below --
2006-06-16 15:49 Barry Scott
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.