From: Jim Cromie <jim.cromie@gmail.com>
To: Linux kernel <linux-kernel@vger.kernel.org>
Subject: [patch -mm 16/20] chardev: GPIO for SCx200 & PC-8736x: fix gpio_current, use shadow regs
Date: Sat, 17 Jun 2006 12:37:04 -0600 [thread overview]
Message-ID: <44944BD0.5050302@gmail.com> (raw)
In-Reply-To: <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>
16/20. patch.shadow-current
Add a working gpio_current() to pc8736x_gpio.c (the previous
implementation just threw a dev_warn), and fix gpio_change() to use
gpio_current() rather than the incorrect (and temporary) gpio_get().
Initialize shadow-regs so this all works.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
diffstat gpio-scx/patch.shadow-current
pc8736x_gpio.c | 27 +++++++++++++++++++++++----
1 files changed, 23 insertions(+), 4 deletions(-)
diff -ruNp -X dontdiff -X exclude-diffs ax-15/drivers/char/pc8736x_gpio.c ax-16/drivers/char/pc8736x_gpio.c
--- ax-15/drivers/char/pc8736x_gpio.c 2006-06-17 01:45:49.000000000 -0600
+++ ax-16/drivers/char/pc8736x_gpio.c 2006-06-17 01:48:50.000000000 -0600
@@ -33,6 +33,7 @@ MODULE_PARM_DESC(major, "Major device nu
static DEFINE_SPINLOCK(pc8736x_gpio_config_lock);
static unsigned pc8736x_gpio_base;
+static u8 pc8736x_gpio_shadow[4];
#define SIO_BASE1 0x2E /* 1st command-reg to check */
#define SIO_BASE2 0x4E /* alt command-reg to check */
@@ -184,6 +185,7 @@ static void pc8736x_gpio_set(unsigned mi
val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
+ pc8736x_gpio_shadow[port] = val;
}
static void pc8736x_gpio_set_high(unsigned index)
@@ -196,15 +198,18 @@ static void pc8736x_gpio_set_low(unsigne
pc8736x_gpio_set(index, 0);
}
-static int pc8736x_gpio_current(unsigned index)
+static int pc8736x_gpio_current(unsigned minor)
{
- dev_warn(&pdev->dev, "pc8736x_gpio_current unimplemented\n");
- return 0;
+ int port, bit;
+ minor &= 0x1f;
+ port = minor >> 3;
+ bit = minor & 7;
+ return pc8736x_gpio_shadow[port] >> bit & 0x01;
}
static void pc8736x_gpio_change(unsigned index)
{
- pc8736x_gpio_set(index, !pc8736x_gpio_get(index));
+ pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
}
extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned iminor);
@@ -240,6 +245,18 @@ static struct file_operations pc8736x_gp
.read = nsc_gpio_read,
};
+static void __init pc8736x_init_shadow(void)
+{
+ int port;
+
+ /* read the current values driven on the GPIO signals */
+ for (port = 0; port < 4; ++port)
+ pc8736x_gpio_shadow[port]
+ = inb_p(pc8736x_gpio_base + port_offset[port]
+ + PORT_OUT);
+
+}
+
static int __init pc8736x_gpio_init(void)
{
int r, rc;
@@ -306,5 +323,7 @@ static void __exit pc8736x_gpio_cleanup(
unregister_chrdev(major, DEVNAME);
}
+EXPORT_SYMBOL(pc8736x_access);
+
module_init(pc8736x_gpio_init);
module_exit(pc8736x_gpio_cleanup);
next prev parent reply other threads:[~2006-06-17 18:37 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <448DB57F.2050006@gmail.com>
[not found] ` <cfe85dfa0606121150y369f6beeqc643a1fe5c7ce69b@mail.gmail.com>
2006-06-17 18:23 ` [patch -mm 01/20] chardev: GPIO for SCx200 & PC-8736x: whitespace pre-clean Jim Cromie
2006-06-17 18:24 ` [patch -mm 02/20] chardev: GPIO for SCx200 & PC-8736x: modernize driver init to 2.6 api Jim Cromie
2006-06-20 5:21 ` Andrew Morton
2006-06-17 18:25 ` [patch -mm 03/20] chardev: GPIO for SCx200 & PC-8736x: add platforn_device for use w dev_dbg Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:26 ` [patch -mm 04/20] chardev: GPIO for SCx200 & PC-8736x: device minor numbers are unsigned ints Jim Cromie
2006-06-17 18:27 ` [patch -mm 05/20] chardev: GPIO for SCx200 & PC-8736x: put gpio_dump on a diet Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:28 ` [patch -mm 06/20] chardev: GPIO for SCx200 & PC-8736x: add 'v' command to device-file Jim Cromie
2006-06-17 18:29 ` [patch -mm 07/20] chardev: GPIO for SCx200 & PC-8736x: refactor scx200_probe to better segregate _gpio initialization Jim Cromie
2006-06-17 18:30 ` [patch -mm 09/20] chardev: GPIO for SCx200 & PC-8736x: dispatch via vtable Jim Cromie
2006-06-17 18:31 ` [patch -mm 10/20] chardev: GPIO for SCx200 & PC-8736x: add empty common-module Jim Cromie
2006-06-17 18:32 ` [patch -mm 11/20] chardev: GPIO for SCx200 & PC-8736x: migrate file-ops to common module Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:33 ` [patch -mm 12/20] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump " Jim Cromie
2006-06-17 18:33 ` [patch -mm 08/20] chardev: GPIO for SCx200 & PC-8736x: add gpio-ops vtable Jim Cromie
2006-06-17 18:34 ` [patch -mm 13/20] chardev: GPIO for SCx200 & PC-8736x: add new pc8736x_gpio module Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:35 ` [patch -mm 14/20] chardev: GPIO for SCx200 & PC-8736x: add platform_device for use w dev_dbg Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:36 ` [patch -mm 15/20] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:37 ` Jim Cromie [this message]
2006-06-20 5:22 ` [patch -mm 16/20] chardev: GPIO for SCx200 & PC-8736x: fix gpio_current, use shadow regs Andrew Morton
2006-06-17 18:38 ` [patch -mm 17/20] chardev: GPIO for SCx200 & PC-8736x: replace spinlocks w mutexes Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-17 18:39 ` [patch -mm 18/20] chardev: GPIO for SCx200 & PC-8736x: display pin values in/out in gpio_dump Jim Cromie
2006-06-17 18:40 ` [patch -mm 19/20] chardev: GPIO for SCx200 & PC-8736x: add proper Kconfig, Makefile entries Jim Cromie
2006-06-17 18:42 ` [patch -mm 20/20 RFC] chardev: GPIO for SCx200 & PC-8736x: add sysfs-GPIO interface Jim Cromie
2006-06-20 5:22 ` Andrew Morton
2006-06-20 19:57 ` Jim Cromie
2006-06-20 20:14 ` Randy.Dunlap
2006-06-20 20:40 ` Jim Cromie
2006-06-20 20:52 ` Randy.Dunlap
2006-06-20 21:50 ` Jim Cromie
2006-06-20 22:52 ` Randy.Dunlap
2006-06-21 0:12 ` Andrew Morton
2006-06-21 3:49 ` Randy.Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44944BD0.5050302@gmail.com \
--to=jim.cromie@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.