From: "Harald Niederländer" <harald.niederlaender@ibmt.fraunhofer.de>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] Problem connecting Bluetooth device
Date: Mon, 19 Jun 2006 14:05:24 +0200 [thread overview]
Message-ID: <44969304.1020502@ibmt.fraunhofer.de> (raw)
In-Reply-To: <1150540961.17539.40.camel@aeonflux.holtmann.net>
Marcel Holtmann schrieb:
> Hi Harald,
>
>
> run it with "hcidump -X -V" as root.
>
> Regards
>
> Marcel
>
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
Hi Marcel,
here are 2 different outputs of "hcidump -X -V" (i apologize for the length)
1. Trying to connect the device for the first time:
doro: # rfcomm connect /dev/rfcomm0 0:11:B1:A2:01:C9
Can't create RFCOMM TTY: Address already in use
doro: #
The device ask for the PIN
doro: # hcidump -X -V -i hci0
HCI sniffer - Bluetooth packet analyzer ver 1.30
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:11:B1:A2:01:C9 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: PIN Code Request (0x16) plen 6
bdaddr 00:11:B1:A2:01:C9
< HCI Command: PIN Code Request Reply (0x01|0x000d) plen 23
bdaddr 00:11:B1:A2:01:C9 len 6 pin '111111'
> HCI Event: Command Complete (0x0e) plen 10
PIN Code Request Reply (0x01|0x000d) ncmd 1
status 0x00 bdaddr 00:11:B1:A2:01:C9
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:11:B1:A2:01:C9 key 060E5E846F8206C5AECD5306622526E6 type 0
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 6 bdaddr 00:11:B1:A2:01:C9 type ACL encrypt 0x01
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 6 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 6
> HCI Event: Max Slots Change (0x1b) plen 3
handle 6 slots 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
< ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
< ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 2
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
< ACL data: handle 6 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0
frame_size 1019 max_retrans 0 credits 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 17
> ACL data: handle 6 flags 0x01 dlen 1
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0
frame_size 320 max_retrans 0 credits 0
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 0 b2 0 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 3
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 0 b2 0 b3 0 len 0
< ACL data: handle 6 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 33
> ACL data: handle 6 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 5
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 1
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6 packets 2
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> ACL data: handle 6 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 6 reason 0x13
Reason: Remote User Terminated Connection
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) status 0x00 ncmd 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 6 reason 0x16
Reason: Connection Terminated by Local Host
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 6 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x48af class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x48af class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x48af class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x48af class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x48af class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x48af class 0x001f00
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
2. Trying to connect the device for the second time (without resetting
the device):
doro: # rfcomm connect /dev/rfcomm0 0:11:B1:A2:01:C9
Can't connect RFCOMM socket: Permission denied
doro: #
The device don't ask for the PIN!!
doro: # hcidump -X -V -i hci0
HCI sniffer - Bluetooth packet analyzer ver 1.30
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:11:B1:A2:01:C9 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Link Key Request (0x17) plen 6
bdaddr 00:11:B1:A2:01:C9
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
bdaddr 00:11:B1:A2:01:C9 key 6F032F60640CF647B6F07173A5A773CD
> HCI Event: Command Complete (0x0e) plen 10
Link Key Request Reply (0x01|0x000b) ncmd 1
status 0x00 bdaddr 00:11:B1:A2:01:C9
> HCI Event: Connect Complete (0x03) plen 11
status 0x05 handle 6 bdaddr 00:11:B1:A2:01:C9 type ACL encrypt 0x00
Error: Authentication Failure
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 6 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c0 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c0 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c0 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c0 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c1 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:11:B1:A2:01:C9 mode 1 clkoffset 0x19c0 class 0x001f00
> HCI Event: Inquiry Result (0x02) plen 15
bdaddr 00:A0:96:0B:98:B8 mode 1 clkoffset 0x7f1e class 0x000510
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
Regards
Harald
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2006-06-19 12:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-12 13:07 [Bluez-devel] Problem connecting Bluetooth device Harald Niederländer
2006-06-17 10:42 ` Marcel Holtmann
2006-06-19 12:05 ` Harald Niederländer [this message]
2006-06-20 9:41 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44969304.1020502@ibmt.fraunhofer.de \
--to=harald.niederlaender@ibmt.fraunhofer.de \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.