From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ian Malone Subject: Re: Fwd: [Alsa-user] Recording spdif/iec958 on ice1724 terratec aureon 7.1 space Date: Tue, 20 Jun 2006 08:51:02 +0100 Message-ID: <4497A8E6.9020002@gmail.com> References: <124299980606190740v47ab8c9dgedbb88a9f607a572@mail.gmail.com> <4497355D.80704@gmail.com> <1150761326.2754.75.camel@mindpipe> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1150761326.2754.75.camel@mindpipe> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@lists.sourceforge.net Errors-To: alsa-devel-bounces@lists.sourceforge.net To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Lee Revell wrote: > On Tue, 2006-06-20 at 00:38 +0100, Ian Malone wrote: > >> Well, this is /etc/asound.state, whether it corresponds to what >> I'm actually using I don't know. >> > > Run "alsactl store" to verify that asound.state matches the mixer > settings. > >> Optical is selected for the IEC958 capture source, I also tried >> CD just to see if it made a difference. >> >> Thanks for your time. > >> control.51 { >> comment.access 'read write' >> comment.type BOOLEAN >> comment.count 1 >> iface MIXER >> name 'IEC958 Capture Switch' >> value false >> } > > Have you tried unmuting "IEC958 Capture Switch"? > That's it! Thanks very much. I had to use alsactl restore to make the change though; toggling the IEC958 capture source in alsamixer doesn't seem to have any effect. Anyway, working nicely now, thanks again. -- imalone