From: Claudio Lanconelli <lanconelli.claudio@eptar.com>
To: linux-mtd@lists.infradead.org
Subject: Re: FAT vs jFFS2 for NAND.
Date: Tue, 20 Jun 2006 13:31:50 +0200 [thread overview]
Message-ID: <4497DCA6.2080006@eptar.com> (raw)
In-Reply-To: <BAY110-F16C625F11A1D80EA24563ABC860@phx.gbl>
[-- Attachment #1: Type: text/plain, Size: 537 bytes --]
Han Chang wrote:
> Thanks! The reason for using FAT on the NAND is when the device has the NAND
> is connected to a PC via USB, it can appear to be storage device read by the
> PC user directly.
>
> Could you provide more details on how to get this SmartMedia Format driver?
>
> Anyone know any other source base which I can leverage to do the job?
>
Hi,
I made some time ago a Smartmedia read only layer for MTD, since I can't
make the current ssfdc.c working.
I attach it if you want to give a look.
Cheers,
Claudio Lanconelli
[-- Attachment #2: ssfdc_ro.c --]
[-- Type: text/x-csrc, Size: 13071 bytes --]
/*
* Linux driver for SSFDC Flash Translation Layer (Read only)
* (c) 2005 Eptar srl
* Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
*
* Based on NTFL and MTDBLOCK_RO drivers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* $Id: ssfdc_ro.c,v 1.5 2005/11/28 13:54:08 claudio Exp $
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/hdreg.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/blktrans.h>
#undef ENABLE_GETGEO
#undef DEBUG
#define DEBUG(n, args...) \
do { \
if (n <= SSFDC_RO_DEBUG_VERBOSE) \
printk(KERN_INFO args); \
} while(0)
#define SSFDC_RO_DEBUG_VERBOSE 0
struct ssfdcr_record {
struct mtd_blktrans_dev mbd;
int usecount;
#ifdef ENABLE_GETGEO
unsigned char heads;
unsigned char sectors;
unsigned short cylinders;
#endif
int cis_block; //block n. containing CIS/IDI
int erase_size; //phys_block_size
unsigned short *logic_block_map; //all zones (max 8192 phys blocks on the 128MB)
int map_len; //n. phys_blocks on the card
};
static const struct nand_oobinfo ssfdc_oobinfo = {
.useecc = MTD_NANDECC_PLACEONLY,
.eccbytes = 6,
.eccpos = {14, 13, 15, 9, 8, 10}
};
#define SSFDCR_MAJOR 44
#define SSFDCR_PARTN_BITS 3
#define SECTOR_SIZE 512
#define SECTOR_SHIFT 9
#define OOB_SIZE 16
#define MAX_LOGIC_BLK_PER_ZONE 1000
#define MAX_PHYS_BLK_PER_ZONE 1024
#define ArraySize(x) ( sizeof(x) / sizeof((x)[0]) )
#define KB(x) ( (x) * 1024L )
#define MB(x) ( KB(x) * 1024L )
/** CHS Table
1MB 2MB 4MB 8MB 16MB 32MB 64MB 128MB
NCylinder 125 125 250 250 500 500 500 500
NHead 4 4 4 4 4 8 8 16
NSector 4 8 8 16 16 16 32 32
SumSector 2,000 4,000 8,000 16,000 32,000 64,000 128,000 256,000
SectorSize 512 512 512 512 512 512 512 512
**/
#ifdef ENABLE_GETGEO
typedef struct {
unsigned long size;
unsigned short cyl;
unsigned char head;
unsigned char sec;
} chs_entry_t;
//Must be ordered by size
static const chs_entry_t chs_table[] = {
{ MB( 1), 125, 4, 4 },
{ MB( 2), 125, 4, 8 },
{ MB( 4), 250, 4, 8 },
{ MB( 8), 250, 4, 16 },
{ MB( 16), 500, 4, 16 },
{ MB( 32), 500, 8, 16 },
{ MB( 64), 500, 8, 32 },
{ MB(128), 500, 16, 32 },
{ 0 },
};
static int get_chs(unsigned long size, unsigned short *cyl, unsigned char *head, unsigned char *sec)
{
int k;
int found = 0;
k = 0;
while ( chs_table[k].size > 0 && size > chs_table[k].size )
k++;
if ( chs_table[k].size > 0 )
{
if (cyl)
*cyl = chs_table[k].cyl;
if (head)
*head = chs_table[k].head;
if (sec)
*sec = chs_table[k].sec;
found = 1;
}
return found;
}
#endif
static const unsigned char nibble_count_bits[16] = {
0,1,1,2,1,2,2,3,1,2,2,3,2,3,3,4
};
//Counts bit 1 in a byte. Use look up table to speed up count
static int byte_count_bits(unsigned char val)
{
return nibble_count_bits[val >> 4] + nibble_count_bits[val & 0x0f];
}
static const unsigned char cis_numbers[] = {
0x01, 0x03, 0xD9, 0x01, 0xFF, 0x18, 0x02, 0xDF, 0x01, 0x20
};
#define OOB_BLOCKSTATUS_OFFSET 5
#define block_is_bad(x) ( byte_count_bits(x) < 7 )
#define block_is_good(x) ( !block_is_bad(x) )
//Read and check for a valid CIS sector
static int get_valid_cis_sector(struct mtd_info *mtd)
{
int ret, k, cis_sector;
size_t retlen;
loff_t offset;
unsigned char sect_buf[SECTOR_SIZE];
unsigned char oob_buf[OOB_SIZE];
//Look for CIS/IDI sector on the first GOOD block (give up after 4 bad blocks)
//If the first good block doesn't contain CIS number the flash is not SSFDC formatted
cis_sector = -1;
for (k = 0, offset = 0; k < 4; k++, offset += mtd->erasesize)
{
ret = MTD_READOOB(mtd, offset, OOB_SIZE, &retlen, oob_buf);
if ( ret < 0 || retlen != OOB_SIZE )
{
DEBUG(MTD_DEBUG_LEVEL0, "SSFDC_RO: can't read OOB data on sector %d\n",
(int)(offset >> SECTOR_SHIFT));
break;
}
if ( block_is_good( oob_buf[OOB_BLOCKSTATUS_OFFSET] ) )
{
ret = MTD_READ(mtd, offset, SECTOR_SIZE, &retlen, sect_buf);
if ( ret < 0 || retlen != SECTOR_SIZE )
{
DEBUG(MTD_DEBUG_LEVEL0, "SSFDC_RO: can't read CIS/IDI sector\n");
}
else
if ( !memcmp(sect_buf, cis_numbers, sizeof(cis_numbers)) ) //CIS pattern matching on the sector buffer
{
cis_sector = (int)(offset >> SECTOR_SHIFT); //Found
}
else
{
DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: CIS/IDI sector not found on %s (mtd%d)\n",
mtd->name, mtd->index);
}
break;
}
}
return cis_sector;
}
//Read physical sector (just a wrapper to MTD_READ)
static int read_physical_sector(struct mtd_info *mtd, unsigned char *sect_buf, int sect_no)
{
int ret;
size_t retlen;
loff_t offset = (loff_t)sect_no << SECTOR_SHIFT;
ret = MTD_READ(mtd, offset, SECTOR_SIZE, &retlen, sect_buf);
if ( ret < 0 || retlen != SECTOR_SIZE )
return -1;
return 0;
}
//Parity calculator on a word of n bit size
static int get_parity(int number, int size)
{
int k;
int parity;
parity = 1;
for (k = 0; k < size; k++)
{
parity += (number >> k);
parity &= 1;
}
return parity;
}
//Read and validate the logical block address field stored in the OOB
static int get_logical_address(unsigned char oob_buf[OOB_SIZE])
{
int block_address, parity;
int offset[2] = {6, 11}; //offset of the two address fields within OOB
int j;
int ok = 0;
//First we check for good block
if ( block_is_bad(oob_buf[OOB_BLOCKSTATUS_OFFSET]) )
{
DEBUG(MTD_DEBUG_LEVEL0, "SSFDC_RO: get_logical_address() Bad block\n");
return -1; //Bad block
}
//Look for the first valid logical address
//Valid address has fixed pattern on most significant bits and parity check
for (j = 0; j < ArraySize(offset); j++)
{
block_address = ((int)oob_buf[offset[j]] << 8) | oob_buf[offset[j]+1];
//Check for the signature bits in the address field (most significant bits)
if( (block_address & ~0x7FF) == 0x1000 )
{
parity = block_address & 0x01;
block_address &= 0x7FF;
block_address >>= 1;
if( get_parity(block_address, 10) != parity )
{
DEBUG(MTD_DEBUG_LEVEL0, "SSFDC_RO: logical address field%d parity error (0x%04X)\n", j+1, block_address);
}
else
{
ok = 1;
break;
}
}
}
if ( !ok )
block_address = -2;
DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: get_logical_address() %d\n", block_address);
return block_address;
}
//Build the logic block map
static int build_logical_block_map(struct ssfdcr_record *ssfdc)
{
unsigned long offset;
unsigned char oob_buf[OOB_SIZE];
int ret, block_address, phys_block;
size_t retlen;
DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: build_block_map() n.blocks = %d (%luK)\n",
ssfdc->map_len, (unsigned long)ssfdc->map_len * ssfdc->erase_size / 1024 );
//Scan every physical block, skip CIS block
for (phys_block = ssfdc->cis_block + 1; phys_block < ssfdc->map_len; phys_block++)
{
offset = (unsigned long)phys_block * ssfdc->erase_size;
ret = MTD_READOOB(ssfdc->mbd.mtd, offset, OOB_SIZE, &retlen, oob_buf);
if ( ret < 0 || retlen != OOB_SIZE )
{
DEBUG(MTD_DEBUG_LEVEL0, "SSFDC_RO: mtd read_oob() failed at %lu\n", offset);
return -1;
}
block_address = get_logical_address(oob_buf);
//Skip bad blocks and invalid addresses
if ( block_address >= 0 && block_address < MAX_LOGIC_BLK_PER_ZONE )
{
int zone_index;
zone_index = phys_block / MAX_PHYS_BLK_PER_ZONE;
block_address += zone_index * MAX_LOGIC_BLK_PER_ZONE;
ssfdc->logic_block_map[block_address] = (unsigned short)phys_block;
DEBUG(MTD_DEBUG_LEVEL2, "SSFDC_RO: build_block_map() phys_block=%d, logic_block_addr=%d, zone=%d\n",
phys_block, block_address, zone_index);
}
}
return 0;
}
static void ssfdcr_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
{
struct ssfdcr_record *ssfdc;
int cis_sector;
//Check for NAND flash
if (mtd->type != MTD_NANDFLASH)
return;
//Check for SSDFC format by reading CIS/IDI sector
cis_sector = get_valid_cis_sector(mtd);
if ( cis_sector == -1 )
return;
ssfdc = kmalloc(sizeof(struct ssfdcr_record), GFP_KERNEL);
if ( !ssfdc )
{
printk(KERN_WARNING "SSFDC_RO: out of memory for data structures\n");
return;
}
memset(ssfdc, 0, sizeof(*ssfdc));
ssfdc->mbd.mtd = mtd;
ssfdc->mbd.devnum = -1;
ssfdc->mbd.blksize = SECTOR_SIZE;
ssfdc->mbd.tr = tr;
ssfdc->mbd.readonly = 1;
ssfdc->cis_block = cis_sector / (mtd->erasesize >> SECTOR_SHIFT);
ssfdc->erase_size = mtd->erasesize;
ssfdc->map_len = mtd->size / mtd->erasesize;
DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: cis_block=%d, erase_size=%d, map_len=%d, n_zones=%d\n",
ssfdc->cis_block, ssfdc->erase_size, ssfdc->map_len,
(ssfdc->map_len + MAX_PHYS_BLK_PER_ZONE - 1) / MAX_PHYS_BLK_PER_ZONE);
#ifdef ENABLE_GETGEO
// Set geometry
get_chs( mtd->size, NULL, &ssfdc->heads, &ssfdc->sectors);
ssfdc->cylinders = (unsigned short)((mtd->size >> SECTOR_SHIFT) /
((long)ssfdc->sectors * (long)ssfdc->heads));
DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: using C:%d H:%d S:%d == %ld sects\n",
ssfdc->cylinders, ssfdc->heads , ssfdc->sectors,
(long)ssfdc->cylinders * (long)ssfdc->heads *
(long)ssfdc->sectors );
ssfdc->mbd.size = (long)ssfdc->heads * (long)ssfdc->cylinders * (long)ssfdc->sectors;
#else
ssfdc->mbd.size = ssfdc->map_len * (ssfdc->erase_size >> SECTOR_SHIFT);
#endif
//Allocate logical block map
ssfdc->logic_block_map = kmalloc( sizeof(ssfdc->logic_block_map[0]) * ssfdc->map_len, GFP_KERNEL);
if (!ssfdc->logic_block_map)
{
printk(KERN_WARNING "SSFDC_RO: out of memory for data structures\n");
kfree(ssfdc);
return;
}
memset(ssfdc->logic_block_map, 0xff, sizeof(ssfdc->logic_block_map[0]) * ssfdc->map_len);
//Build logical block map
if( build_logical_block_map(ssfdc) < 0 )
{
if ( ssfdc->logic_block_map )
kfree(ssfdc->logic_block_map);
kfree(ssfdc);
return;
}
//Register device + partitions
if (add_mtd_blktrans_dev(&ssfdc->mbd))
{
if ( ssfdc->logic_block_map )
kfree(ssfdc->logic_block_map);
kfree(ssfdc);
return;
}
printk(KERN_INFO "SSFDC_RO: Found ssfdc%c on mtd%d (%s)\n",
ssfdc->mbd.devnum + 'a', mtd->index, mtd->name);
}
static void ssfdcr_remove_dev(struct mtd_blktrans_dev *dev)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: remove_dev (i=%d)\n", dev->devnum);
del_mtd_blktrans_dev(dev);
if (ssfdc->logic_block_map)
kfree(ssfdc->logic_block_map);
kfree(ssfdc);
}
static int ssfdcr_readsect(struct mtd_blktrans_dev *dev, unsigned long logic_sect_no, char *buf)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
int sectors_per_block, offset, block_address;
sectors_per_block = ssfdc->erase_size >> SECTOR_SHIFT;
offset = (int)(logic_sect_no % sectors_per_block);
block_address = (int)(logic_sect_no / sectors_per_block);
DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: ssfdcr_readsect(%lu) sec_per_blk=%d, ofst=%d, block_addr=%d\n",
logic_sect_no, sectors_per_block, offset, block_address);
if ( block_address >= ssfdc->map_len )
BUG();
block_address = ssfdc->logic_block_map[block_address];
DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: ssfdcr_readsect() phys_block_addr=%d\n", block_address);
if ( block_address < 0xffff )
{
unsigned long sect_no;
sect_no = (unsigned long)block_address * sectors_per_block + offset;
DEBUG(MTD_DEBUG_LEVEL3, "SSFDC_RO: ssfdcr_readsect() phys_sect_no=%lu\n", sect_no);
if ( read_physical_sector( ssfdc->mbd.mtd, buf, sect_no ) < 0 )
return -EIO;
}
else
{
memset(buf, 0xff, SECTOR_SIZE);
}
return 0;
}
#ifdef ENABLE_GETGEO
static int ssfdcr_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo)
{
struct ssfdcr_record *ssfdc = (struct ssfdcr_record *)dev;
DEBUG(MTD_DEBUG_LEVEL1, "SSFDC_RO: ssfdcr_getgeo() C=%d, H=%d, S=%d\n",
ssfdc->cylinders, ssfdc->heads, ssfdc->sectors);
geo->heads = ssfdc->heads;
geo->sectors = ssfdc->sectors;
geo->cylinders = ssfdc->cylinders;
return 0;
}
#endif
/****************************************************************************
*
* Module stuff
*
****************************************************************************/
static struct mtd_blktrans_ops ssfdcr_tr = {
.name = "ssfdc",
.major = SSFDCR_MAJOR,
.part_bits = SSFDCR_PARTN_BITS,
#ifdef ENABLE_GETGEO
.getgeo = ssfdcr_getgeo,
#endif
.readsect = ssfdcr_readsect,
.add_mtd = ssfdcr_add_mtd,
.remove_dev = ssfdcr_remove_dev,
.owner = THIS_MODULE,
};
static int __init init_ssfdcr(void)
{
printk(KERN_INFO "SSFDC Read only Flash Translation layer $Revision: 1.5 $\n");
return register_mtd_blktrans(&ssfdcr_tr);
}
static void __exit cleanup_ssfdcr(void)
{
deregister_mtd_blktrans(&ssfdcr_tr);
}
module_init(init_ssfdcr);
module_exit(cleanup_ssfdcr);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
MODULE_DESCRIPTION("Flash Translation Layer for read-only SSDFC SmartMedia card");
next prev parent reply other threads:[~2006-06-20 11:41 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-28 2:58 FAT vs jFFS2 for NAND Han Chang
2006-05-28 5:54 ` Charles Manning
2006-06-15 0:34 ` Han Chang
2006-06-15 7:53 ` Thomas Gleixner
2006-06-19 18:31 ` Han Chang
2006-06-19 18:38 ` Thomas Gleixner
2006-06-19 20:23 ` David Woodhouse
2006-06-19 21:10 ` Charles Manning
2006-06-20 11:31 ` Claudio Lanconelli [this message]
2006-06-20 12:30 ` David Woodhouse
2006-06-20 13:25 ` Claudio Lanconelli
2006-06-20 13:52 ` Thomas Gleixner
2006-06-20 17:26 ` Claudio Lanconelli
2006-06-20 17:41 ` Thomas Gleixner
2006-06-21 14:15 ` Claudio Lanconelli
2006-06-21 18:19 ` Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4497DCA6.2080006@eptar.com \
--to=lanconelli.claudio@eptar.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.