From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
To: hilichen2000@msn.com
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: could linux support to configure the PLB-PCI bridge of PPC440 into adapter mode
Date: Tue, 20 Jun 2006 15:41:04 +0200 [thread overview]
Message-ID: <4497FAF0.3080701@esd-electronics.com> (raw)
In-Reply-To: <BAY110-F6CB7A492DE83E6E81F18DC3870@phx.gbl>
Hello chen,
that's how we do it on our boards (a couple of 405GP(r) based adapters).
We normally hide the top meg's of RAM so that it is not used by Linux.
We setup the PLB side of the bridge to point to this RAM so that it is
accessable from the PCI side.
Matthias
> hi Matthias:
> thank for your reply.
> according to information you provide, i should set the proper
> parameter of register of PPC440GX in U-BOOT(I use u-boot as
> bootloader),such as PAE,PHCE,PISE of SDR0_XCR and BAR etc. during the
> time of linux kernel booting, I turn off CONFIG_PCI , let linux kernel
> don't initialize the PCI bus as host bridge and set PLB address in
> kernel. then after the linux system operated, the ppc440gx could act as
> adapter mode. does my understanding correct? i really appreciate your
> help.
>
> chen
prev parent reply other threads:[~2006-06-20 13:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-19 7:57 could linux support to configure the PLB-PCI bridge of PPC440 into adapter mode 陈 云
2006-06-19 14:11 ` Matthias Fuchs
2006-06-20 9:10 ` 陈 云
2006-06-20 13:41 ` Matthias Fuchs [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4497FAF0.3080701@esd-electronics.com \
--to=matthias.fuchs@esd-electronics.com \
--cc=hilichen2000@msn.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.