From: "Scott J. Harmon" <harmon@ksu.edu>
To: Sergey Vlasov <vsu@altlinux.ru>
Cc: linux-kernel@vger.kernel.org, Chris Wedgwood <cw@f00f.org>
Subject: Re: acpi gets wrong interrupt for via sata in 2.6.16.17
Date: Sun, 25 Jun 2006 22:58:43 -0500 [thread overview]
Message-ID: <449F5B73.4020102@ksu.edu> (raw)
In-Reply-To: <20060625132457.4b0922b4.vsu@altlinux.ru>
Sergey Vlasov wrote:
> On Sat, 24 Jun 2006 20:28:26 -0500 Scott J. Harmon wrote:
>
>> The short: something that came in 2.6.16.17 has caused my sata to no
>> longer work correctly (by work correctly, I mean actually be able to
>> detect any drives). I'm no expert, but it seems that it is getting the
>> wrong interrupt. In 2.6.16.16 it works fine with the exact same config.
>> It also works fine if I append 'pci=noacpi'. This has still happens in
>> 2.6.17.
>
> I assume that your root filesystem is on a SATA disk, and therefore you
> don't have an easy way to extract dmesg from a broken kernel?
>
Exactly :)
>> Here is the output of lspci:
>>
>> scott@amdg:~$ /sbin/lspci
>> 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
>> Host Bridge (rev 80)
>> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
>> 00:07.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705
>> Gigabit Ethernet (rev 03)
>> 00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
>> Controller (rev 46)
>> 00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
>> 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
>> Controller (rev 80)
>> 00:0f.1 IDE interface: VIA Technologies, Inc.
>> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
>> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 81)
>> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 81)
>> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 81)
>> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
>> Controller (rev 81)
>> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
>> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
>> [KT600/K8T800/K8T890 South]
>> 01:00.0 VGA compatible controller: nVidia Corporation NV15DDR [GeForce2
>> Ti] (rev a4)
>
> Try to revert these patches:
>
> http://kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commitdiff_plain;h=dc0f369552b491d1578e8a8c6f6512e17246241c
>
> http://kernel.org/git/?p=linux/kernel/git/stable/linux-2.6.16.y.git;a=commitdiff_plain;h=c72493379d4aaac49ad3366987db1e118bb4f5ba
>
> (revert in the above order - these are two patches which depend on each
> other, you need to revert both). You can try it both with 2.6.16.17
> and 2.6.17.
>
> Chris: seems that the SATA subdevice (1106:3149) also needs the quirk,
> like EHCI, sound and builtin network.
Will do, and will report back.
Thanks,
Scott.
--
"Computer Science is no more about computers than astronomy is about
telescopes." - Edsger Dijkstra
next prev parent reply other threads:[~2006-06-26 3:59 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-25 1:28 acpi gets wrong interrupt for via sata in 2.6.16.17 Scott J. Harmon
2006-06-25 9:24 ` Sergey Vlasov
2006-06-26 3:58 ` Scott J. Harmon [this message]
2006-06-28 0:04 ` Scott J. Harmon
2006-07-07 0:30 ` Scott J. Harmon
2006-07-07 1:14 ` Andrew Morton
2006-07-07 3:47 ` Chris Wedgwood
2006-07-07 3:55 ` Andrew Morton
2006-09-01 3:07 ` Scott J. Harmon
2006-09-01 3:11 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=449F5B73.4020102@ksu.edu \
--to=harmon@ksu.edu \
--cc=cw@f00f.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vsu@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.