From mboxrd@z Thu Jan 1 00:00:00 1970 From: Devanshu Mehta Date: Tue, 27 Jun 2006 14:58:37 +0000 Subject: Re: [LARTC] Looking for info Message-Id: <44A1479D.2080602@ll.mit.edu> List-Id: References: <1AF03DD747F4D911A7E800E0180BB1A503DAD19D@MAIL_COM> In-Reply-To: <1AF03DD747F4D911A7E800E0180BB1A503DAD19D@MAIL_COM> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Neil Russell wrote: > I am looking for information on how I might use a Linux box with three > network cards to service two subnets off of a single 10Mg VPN feed. > We have currently got two 5 offices all connected over a VPN. Is that 2 or 5? I am assuming it is 5. > What I would like to achieve is a single linux box with 3 network > cards in, one on the 10Mg feed (10.0.0.1), one on the xxx.xxx.0.0 > network (xxx.xxx.100.99) and one on the yyy.yyy.0.0 network > (yyy.yyy.100.99). > > With a completely clean redhat 7 install is this a simple thing to > achieve? What sort of routing tables would I need? > I may be misunderstanding the simplicity of your problem, but since you have 3 directly connected networks, as long as routing is enabled on the Red Hat box, the machine should route packets correctly. If not, you can add static routes. Something like this should be a sufficient resource: http://www.siliconvalleyccie.com/linux-hn/network-linux.htm If the problem is more complex than I have assumed, let me know. Devanshu _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc