From mboxrd@z Thu Jan 1 00:00:00 1970 From: anything@daanwillems.nl (Daan Willems) Date: Thu, 29 Jun 2006 07:33:35 +0000 Subject: [lm-sensors] nvidia nforce410 chipset / ASUS K8N-VM Message-Id: <44A3824F.4060205@daanwillems.nl> List-Id: References: <44A326F3.3070300@winbond.com> In-Reply-To: <44A326F3.3070300@winbond.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hello Yuan, Thanks for your quick response. I am using latest vanilla kernels from kernel.org (so 2.6.17.1 now). Which version will support the voltage stuff in the w83627 driver? Btw I also tried some patches for the 410 chip on the nforce2 driver that I found in the lmsensors archive, but those didn't bring me anything either. Best, Daan Yuan Mu wrote: > Hello Daan, > >> I subscribed to the list because I am trying to configure lm-sensors >> for my ASUS K8N-VM motherboard, which features a nvidia nforce410 >> chipset (the one with geforce6100 integrated). So far I have good >> results with the w83627ehf kernel module, yielding the following output: >> >> ------- >> d3vlin at arrakis ~ $ sensors >> w83627ehf-isa-0290 >> Adapter: ISA adapter >> Chassis Fan: 1795 RPM (min = 1205 RPM, div = 8) >> CPU Fan: 3245 RPM (min = 1704 RPM, div = 8) >> System Temp: +28?C (high = +60?C, hyst = +40?C) >> CPU Temp: +30.0?C (high = +60.0?C, hyst = +40.0?C) >> Chipset Temp: +33.0?C (high = +60.0?C, hyst = +40.0?C) >> d3vlin at arrakis ~ $ >> ------- >> >> As one might notice, there is no information about VCore / 3.3V etc. >> displayed. I have tried some modules, i2c_nforce2 in particular, but >> no results. I wonder if there is support for this chipset or if anyone >> has better results. I have included the relevant part of my >> /etc/sensors.conf below. > I think the reason is voltage support not added to the driver in your > kernel version. > The feature is added to the new kernel now. > And give us the kernel version would be useful.