* MPC5200 PCI resource allocation problem
@ 2006-07-06 7:17 robinpv
0 siblings, 0 replies; only message in thread
From: robinpv @ 2006-07-06 7:17 UTC (permalink / raw)
To: linuxppc-dev
Hi,
I am using the MPC5200 based board. I have a PCI 2250 bridge, with 2
RTL8110S ethernet chips on the bridge.
I am using the lite5200 as reference code.
When i run the linux(2.6.16.1), during bootup the following messages are
displayed,
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of PCI bridge 1
PCI: bridge 1 resource 0 moved to b0fff000..b0ffffff
PCI: Cannot allocate resource region 1 of PCI bridge 1
PCI: bridge 1 resource 1 moved to aff00000..afffffff
PCI: Cannot allocate resource region 2 of PCI bridge 1
PCI: bridge 1 resource 2 moved to 9ff00000..9fffffff
Looking at the iomem and ioports dump, shows that MMIO region has been
allocated.
But in the ethernet driver when i try to access the ethernet registers.
all the register content are shown as FFFF.
Also in the mpc52xx_pci.h, the default value for these macros are...
#define MPC52xx_PCI_IO_BASE 0xb0000000
#define MPC52xx_PCI_IO_START 0x00000000
For this setting, IO resource allocation fails
changing to
#define MPC52xx_PCI_IO_START 0xB0000000
passes through.
Can some suggest what could be the problem and how to go about.??
-------------------------------------------------------------------
the iomem dump is as follows
80000000-9fffffff : PCI prefetchable memory
9ff00000-9fffffff : PCI Bus #01
a0000000-afffffff : PCI memory
a0000000-a07fffff : 0000:00:10.0
a0800000-a09fffff : 0000:00:10.0
a0840000-a0840057 : ohci_hcd
a0a00000-a0a000ff : 0000:00:11.0
a0a00000-a0a000ff : SiI680
a0a40000-a0a7ffff : 0000:00:1a.0
aff00000-afffffff : PCI Bus #01
aff00000-aff000ff : 0000:01:02.0
aff00000-aff000ff : r8169 <= Ethernet 1
aff00100-aff001ff : 0000:01:03.0
aff00100-aff001ff : r8169 <=Ethernet 2
f0000900-f000097f : mpc52xx-mscan.0
f0000980-f00009ff : mpc52xx-mscan.1
f0000f00-f0000f1f : mpc52xx-spi
f0001000-f00010ff : ppc-soc-ohci
f0001300-f000130f : mpc52xx-bdlc
f0002000-f000209f : mpc52xx-psc.0
f0002000-f000209f : mpc52xx_psc_uart
f0002200-f000229f : mpc52xx-psc.1
f0002400-f000249f : mpc52xx-psc.2
f0002600-f000269f : mpc52xx-psc.3
f0002800-f000289f : mpc52xx-psc.4
f0002c00-f0002c9f : mpc52xx-psc.5
f0003000-f00033ff : mpc52xx-fec
f0003a00-f0003aff : mpc52xx-ata
f0003d00-f0003d1f : fsl-i2c.0
f0003d40-f0003d5f : fsl-i2c.1
-------------------------------------------------------
the ioports dump is
b0000000-b0000007 : 0000:00:11.0
b0000008-b000000b : 0000:00:11.0
b000000c-b000000f : 0000:00:11.0
b0000010-b0000017 : 0000:00:11.0
b0000020-b000002f : 0000:00:11.0
b0fff000-b0ffffff : PCI Bus #01
b0fff000-b0fff0ff : 0000:01:02.0
b0fff000-b0fff0ff : r8169 <=Ethernet 1
b0fff400-b0fff4ff : 0000:01:03.0
b0fff400-b0fff4ff : r8169 <=Ethernet 2
----------------------------------------------------------
With Regards,
Robin
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-07-06 7:16 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-07-06 7:17 MPC5200 PCI resource allocation problem robinpv
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.