[lm-sensors] Tyan S2720 Revsion 2.01 again

[r.marek@sh.cvut.cz (Rudolf Marek)]

Hi Marcus,

> tested sensors.conf (see attachment) for Tyan S2720 from Tyan's ftp
> server, but just get the follwing strange output. Any ideas, what's
> going wrong here? 
> 
> System: Linux 2.6.15-25-server #1 SMP  (Ubuntu dapper)
> 
> Thanks,
> Marcus
> 
> ---------
> adm1021-i2c-0-19
> Adapter: SMBus I801 adapter at ec80
> CPU 2 temp:
>               -1?C  (low  =    -1?C, high =    -1?C)  ALARM
> (N/A,LOW,HIGH)
> ERROR: Can't get die-code data!


Hmm strange, please can you provide output of i2cdump 0 0x19
and i2cdump 0 0x18 ?

And BTW try first change the BIOS, quoting the sensors.conf

#      therefore does not require the i2c-isa module.  Currently, the    #

#      BIOS also has a problem with the CPU temps.  If they read -1,     #

#      or 255, check the Tyan website for an updated BIOS.               #

I think it should solve it.

> 
> w83627hf-isa-0290
> Adapter: ISA adapter
> Fan4:        0 RPM  (min = 168750 RPM, div = 2)
> Fan5:        0 RPM  (min = 225000 RPM, div = 2)
> Fan6:        0 RPM  (min = 337500 RPM, div = 2)

Maybe you need to change the fan divisor to see the fan  set fan1_div 4
(as the tynan config file suggests)

> alarms:
> beep_enable:
>           Sound alarm disabled
> 
> w83627hf-i2c-0-2a
> Adapter: SMBus I801 adapter at ec80
> Fan4:        0 RPM  (min =    0 RPM, div = 128)
> Fan5:        0 RPM  (min =    0 RPM, div = 128)
> Fan6:        0 RPM  (min =    0 RPM, div = 128)
> (beep)

Heh same chip can be accessed both from ISA or from SMBUS. Please do not load
i2c-isa and you will get rid of this duplicity.

> alarms:
> beep_enable:
>           Sound alarm enabled
> 
> w83782d-i2c-0-29
> Adapter: SMBus I801 adapter at ec80
> +3.3V:     +3.34 V  (min =  +3.14 V, max =  +3.46 V)
> +5V:       +4.97 V  (min =  +4.73 V, max =  +5.24 V)
> +12V:     +12.04 V  (min = +10.82 V, max = +13.19 V)
> VBat:      +2.10 V  (min =  +2.40 V, max =  +3.60 V)
> CPU1 Fan: 9642 RPM  (min = 84375 RPM, div = 2)
> CPU2 Fan: 9642 RPM  (min = 84375 RPM, div = 2)
> Fan3:        0 RPM  (min = 84375 RPM, div = 2)
> VRM Temp:    +45?C  (high =  +100?C, hyst =   +90?C)   sensor > transistor
> alarms:   Chassis intrusion detection                      ALARM
> beep_enable:
>           Sound alarm disabled
> ---------

Hope it helps,
Regards
Rudolf