All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Drake <dsd@gentoo.org>
To: Sergio Monteiro Basto <sergio@sergiomb.no-ip.org>
Cc: Chris Wedgwood <cw@f00f.org>, Andrew Morton <akpm@osdl.org>,
	Jeff Garzik <jeff@garzik.org>,
	greg@kroah.com, harmon@ksu.edu, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Add SATA device to VIA IRQ quirk fixup list
Date: Fri, 14 Jul 2006 18:06:08 +0100	[thread overview]
Message-ID: <44B7CF00.8090204@gentoo.org> (raw)
In-Reply-To: <1152895734.11043.5.camel@localhost.localdomain>

Sergio Monteiro Basto wrote:
>> I just confirmed this on my own system, at least partially. I removed 
>> the quirk and the system booted fine.
>>
>> This is with ACPI enabled, but APIC not enabled (hence the interrupts 
>> are XT-PIC). I cannot enable APIC on this system due to buggy BIOS.
>>
>> Daniel
> 
> Daniel, VIA_SATA is not in the list , so when you write remove , you
> remove what ? or you want say the opposite ?  
> Please rephrase your sentence .

Sorry, I should have been clearer. I do not own any VIA SATA hardware 
(that info was relayed from a Gentoo bug report). My own hardware is 
older, [Apollo KT266/A/333]. The quirk gets applied to my IDE controller 
only (both before and after Chris's changes), and I boot from a disk 
connected to this IDE controller.

00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo 
KT266/A/333 AGP]
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 23)
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 
Controller (rev 23)
01:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 
GTS/Pro] (rev a3)

When I said I removed the quirk, I meant I removed the whole quirk, 
which prevented it from running on my hardware.

> Do you need quirk SATA with acpi=off  ?

Assuming you mean "quirk IDE", no.

> Do you need quirk with ACPI enabled ? 

No. But, my interrupts are always XT-PIC, I cannot enable IO-APIC (not 
sure how much relevance that has, possibly worth noting though).



Just for clarity, I'll respond to those 2 questions again with Aiko 
Barz's system in mind (the user on the Gentoo bug report) -- this is the 
one with the VIA SATA hardware.

 > Do you need quirk SATA with acpi=off  ?

No.

 > Do you need quirk with ACPI enabled ?

Yes.


Daniel

  reply	other threads:[~2006-07-14 17:00 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-07-14  9:52 [PATCH] Add SATA device to VIA IRQ quirk fixup list Daniel Drake
2006-07-14 11:08 ` Jeff Garzik
2006-07-14 11:40   ` Daniel Drake
2006-07-14 11:51     ` Jeff Garzik
2006-07-14 12:15       ` Daniel Drake
2006-07-14 12:51         ` Sergey Vlasov
2006-07-14 13:20           ` Daniel Drake
2006-07-14 14:43       ` Andrew Morton
2006-07-14 15:42         ` Chris Wedgwood
2006-07-14 16:01           ` Scott J. Harmon
2006-07-14 16:17           ` Daniel Drake
2006-07-14 16:16             ` Chris Wedgwood
2006-07-14 16:24             ` Daniel Drake
2006-07-14 16:33               ` Chris Wedgwood
2006-07-14 16:51                 ` Daniel Drake
2006-07-14 16:48               ` Sergio Monteiro Basto
2006-07-14 17:06                 ` Daniel Drake [this message]
2006-07-14 17:21                   ` Sergey Vlasov
2006-07-14 15:46         ` Sergio Monteiro Basto
2006-07-14 16:13           ` Chris Wedgwood
2006-07-15  0:10             ` Sergio Monteiro Basto
2006-07-16 14:09         ` Daniel Drake
2006-07-16 18:31           ` Greg KH
2006-07-17  0:34             ` Chris Wedgwood
2006-07-25  4:40               ` Andrew Morton
2006-07-26  0:42                 ` Alan Cox
2006-07-26 12:45                   ` Sergio Monteiro Basto
2006-07-26 13:59                     ` Daniel Drake
2006-07-26 14:06                       ` Sergio Monteiro Basto
2006-07-26 14:31                         ` Daniel Drake
2006-07-26 15:11                           ` Sergio Monteiro Basto
2006-07-26 22:14                           ` Sergio Monteiro Basto
2006-07-14 23:58   ` Chris Wedgwood
  -- strict thread matches above, loose matches on Subject: below --
2006-07-14 19:26 Brown, Len

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44B7CF00.8090204@gentoo.org \
    --to=dsd@gentoo.org \
    --cc=akpm@osdl.org \
    --cc=cw@f00f.org \
    --cc=greg@kroah.com \
    --cc=harmon@ksu.edu \
    --cc=jeff@garzik.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sergio@sergiomb.no-ip.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.