From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Schweigstill Date: Wed, 19 Jul 2006 12:54:46 +0200 Subject: [U-Boot-Users] Loadb issue In-Reply-To: References: Message-ID: <44BE0F76.50208@schweigstill.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Banajit! Banajit Goswami schrieb: > Content-Type: text/html; charset=ISO-8859-1 > Content-Transfer-Encoding: 7bit > Content-Disposition: inline Please do not post messages in HTML format to this list. > 3) at u-boot command prompt gave following command > => loadb 0x60008000 115200 > 4) From hyperterminal, Transfer->send file with protocol as kermit, > selected the file and tried sending, but failed. Everytime > hyperterminal poped up "error limit exceeded". Are you sure that you are using the same baudrate for terminal mode and kermit mode? Do the RS232 level converters have their own supply or do they get it from the modem control lines? Although you selected no handshake this doesn't neccessarily mean that the control lines don't get toggled. With best regards Andreas Schweigstill -- Dipl.-Phys. Andreas Schweigstill Schweigstill IT | Embedded Systems Schauenburgerstra?e 116, D-24118 Kiel, Germany Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436 Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/