From: Alex Zeffertt <ajz@cambridgebroadband.com>
To: linuxppc-embedded@ozlabs.org, linux-atm-general@lists.sourceforge.net
Subject: mpc8360sar
Date: Thu, 20 Jul 2006 11:39:41 +0100 [thread overview]
Message-ID: <44BF5D6D.1070400@cambridgebroadband.com> (raw)
Hi lists,
I'm writing to announce a new project http://mpc8360sar.sourceforge.net .
This is an ATM driver for the QUICC Engine (QE) of the PowerQUICC II Pro
range of processors. It is based on Tony Li's fsl-atm driver and my
mpc8260sar driver. I've basically used Tony's driver for the most low level
stuff and ported a lot of extra functionality from my PQII driver.
You will need the Linux BSP from Freescale to build this driver.
I have only tested this driver on mpc832xe-mds, but it should also work on
the mpc8360e-pb board.
If you use mpc8360sar, please let me know how you get on. In particular
let me know if you work out how to stop the QE occaisionally corrupting the
TCT when using external channels.
Regards,
Alex
next reply other threads:[~2006-07-20 10:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-20 10:39 Alex Zeffertt [this message]
2006-07-20 12:07 ` [Linux-ATM-General] mpc8360sar Li Tony-r64360
2006-07-20 12:35 ` Alex Zeffertt
2006-07-20 13:13 ` Kumar Gala
2006-07-20 13:33 ` Alex Zeffertt
2006-07-20 13:54 ` Kumar Gala
2006-07-20 16:14 ` Alex Zeffertt
2006-07-21 2:36 ` Li Tony-r64360
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44BF5D6D.1070400@cambridgebroadband.com \
--to=ajz@cambridgebroadband.com \
--cc=linux-atm-general@lists.sourceforge.net \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.