From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.mdivac.com (adsl-68-253-104-89.dsl.bcvloh.ameritech.net [68.253.104.89]) by ozlabs.org (Postfix) with ESMTP id 08ECF67B56 for ; Fri, 28 Jul 2006 01:42:42 +1000 (EST) Message-ID: <44C8DC19.9030600@mdivac.com> Date: Thu, 27 Jul 2006 11:30:33 -0400 From: Frank D Lombardo MIME-Version: 1.0 To: linuxppc-embedded@ozlabs.org Subject: Re: Where to store the Linux kernel. References: In-Reply-To: Content-Type: text/plain; charset=GB2312 List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Ming, I am using an ML403 in a similar way. I have the download.bit file stored in platform flash. U-Boot, the Linux Kernel and initrd are stored in the linear flash. Frank Ming Liu wrote: > Hello everyone, > Now I am doing a embedded linux project on the board of ML403(virtex4, > ppc405). In my product, I cannot use CF card. So I have to use flash memory > to store the Linux kernel. Except for the Linux kernel, also I have to > store the hardware information of the system.bit file. I know in ml403 > board, there are two types of flash. One is Platform Flash and the other is > Linear Flash. Can anyone tell me how can I arrange my hardware .bit file > and Linux kernel zImage.elf file and store them in the flash provided in > the board? Can I put both of them in the Platform Flash chip? Thanks for > the telling. > > Regards > Ming > > _________________________________________________________________ > 与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn > > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded