[lm-sensors] Tyan S2466N fan control help

[lm-sensors] Tyan S2466N fan control help

[Jax]

Hi guys!

I trying with fancontrol on my Tyan S2466N motherboard.
Sensors work properly but I can't control the FANs, this example both of 
the fans speed is 0 because they disconnected atm :)

w83782d-i2c-0-2d
Adapter: SMBus AMD768 adapter at 80e0
VCore 1:   +1.63 V  (min =  +1.57 V, max =  +1.73 V)
VCore 2:   +1.68 V  (min =  +1.57 V, max =  +1.73 V)
+3.3V:     +1.54 V  (min =  +3.14 V, max =  +3.46 V)       ALARM
+5V:       +4.84 V  (min =  +4.73 V, max =  +5.24 V)
+12V:      +4.62 V  (min = +10.82 V, max = +13.19 V)       ALARM
-12V:      -2.33 V  (min = -13.18 V, max = -10.88 V)       ALARM
-5V:       +2.64 V  (min =  -5.25 V, max =  -4.75 V)       ALARM
V5SB:      +4.25 V  (min =  +4.73 V, max =  +5.24 V)       ALARM
VBat:      +3.26 V  (min =  +2.40 V, max =  +3.60 V)
fan1:        0 RPM  (min = 21093 RPM, div = 4)              ALARM
fan2:        0 RPM  (min =   -1 RPM, div = 4)              ALARM
fan3:        0 RPM  (min = 168750 RPM, div = 4)              ALARM
temp1:       +81 C  (high =    +8 C, hyst =   -62 C)   sensor = 
thermistor   ALARM
temp2:     +79.5 C  (high =   +80 C, hyst =   +75 C)   sensor = 
thermistor     
temp3:     +79.0 C  (high =   +80 C, hyst =   +75 C)   sensor = 
thermistor     
vid:      +1.650 V  (VRM Version 9.0)
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm enabled

w83627hf-isa-0c00
Adapter: ISA adapter
VCore 1:   +1.62 V  (min =  +0.00 V, max =  +0.00 V)       ALARM
VCore 2:   +1.65 V  (min =  +0.00 V, max =  +0.00 V)       ALARM
+3.3V:     +3.34 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +5.08 V  (min =  +4.76 V, max =  +5.24 V)
+12V:      +9.42 V  (min = +10.82 V, max = +13.19 V)       ALARM
-12V:     -11.95 V  (min = -13.18 V, max = -10.80 V)
-5V:       +0.33 V  (min =  -5.25 V, max =  -4.75 V)       ALARM
V5SB:      +5.59 V  (min =  +4.76 V, max =  +5.24 V)       ALARM
VBat:      +2.32 V  (min =  +2.40 V, max =  +3.60 V)       ALARM
fan1:        0 RPM  (min = 7670 RPM, div = 2)              ALARM
fan2:        0 RPM  (min = 3479 RPM, div = 2)              ALARM
fan3:        0 RPM  (min = 4623 RPM, div = 2)              ALARM
temp1:       +77 C  (high =   +53 C, hyst =   +80 C)   sensor = 
thermistor     
temp2:     +79.0 C  (high =   +80 C, hyst =   +75 C)   sensor = 
thermistor     
temp3:     +76.5 C  (high =   +80 C, hyst =   +75 C)   sensor = 
thermistor     


Is there anyone who can make it work with my motherboard or somethink 
like this from tyan?
The problem not lm-sensors specific because I get the same with speedfan 
or motherboard monitor app in windows. I tryed to search but I go 
nowhere with google. Bios upgrade also impossible if it would be the 
problem, because tyan doesn't support this board anymore. The board has 
6 fan connectors and I tried all but still the same results.

Regards,

Jax

[lm-sensors] Tyan S2466N fan control help

[Jax]

Hi guys!

I trying with fancontrol on my Tyan S2466N motherboard.
Sensors work properly but I can't control the FANs, this example both of
the fans speed is 0 because they disconnected atm :)

w83782d-i2c-0-2d
Adapter: SMBus AMD768 adapter at 80e0
VCore 1:   +1.63 V  (min =  +1.57 V, max =  +1.73 V)
VCore 2:   +1.68 V  (min =  +1.57 V, max =  +1.73 V)
+3.3V:     +1.54 V  (min =  +3.14 V, max =  +3.46 V)       ALARM
+5V:       +4.84 V  (min =  +4.73 V, max =  +5.24 V)
+12V:      +4.62 V  (min = +10.82 V, max = +13.19 V)       ALARM
-12V:      -2.33 V  (min = -13.18 V, max = -10.88 V)       ALARM
-5V:       +2.64 V  (min =  -5.25 V, max =  -4.75 V)       ALARM
V5SB:      +4.25 V  (min =  +4.73 V, max =  +5.24 V)       ALARM
VBat:      +3.26 V  (min =  +2.40 V, max =  +3.60 V)
fan1:        0 RPM  (min = 21093 RPM, div = 4)              ALARM
fan2:        0 RPM  (min =   -1 RPM, div = 4)              ALARM
fan3:        0 RPM  (min = 168750 RPM, div = 4)              ALARM
temp1:       +81 C  (high =    +8 C, hyst =   -62 C)   sensor thermistor   ALARM
temp2:     +79.5 C  (high =   +80 C, hyst =   +75 C)   sensor thermistor
temp3:     +79.0 C  (high =   +80 C, hyst =   +75 C)   sensor thermistor
vid:      +1.650 V  (VRM Version 9.0)
alarms:   Chassis intrusion detection                      ALARM
beep_enable:
          Sound alarm enabled

w83627hf-isa-0c00
Adapter: ISA adapter
VCore 1:   +1.62 V  (min =  +0.00 V, max =  +0.00 V)       ALARM
VCore 2:   +1.65 V  (min =  +0.00 V, max =  +0.00 V)       ALARM
+3.3V:     +3.34 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +5.08 V  (min =  +4.76 V, max =  +5.24 V)
+12V:      +9.42 V  (min = +10.82 V, max = +13.19 V)       ALARM
-12V:     -11.95 V  (min = -13.18 V, max = -10.80 V)
-5V:       +0.33 V  (min =  -5.25 V, max =  -4.75 V)       ALARM
V5SB:      +5.59 V  (min =  +4.76 V, max =  +5.24 V)       ALARM
VBat:      +2.32 V  (min =  +2.40 V, max =  +3.60 V)       ALARM
fan1:        0 RPM  (min = 7670 RPM, div = 2)              ALARM
fan2:        0 RPM  (min = 3479 RPM, div = 2)              ALARM
fan3:        0 RPM  (min = 4623 RPM, div = 2)              ALARM
temp1:       +77 C  (high =   +53 C, hyst =   +80 C)   sensor thermistor
temp2:     +79.0 C  (high =   +80 C, hyst =   +75 C)   sensor thermistor
temp3:     +76.5 C  (high =   +80 C, hyst =   +75 C)   sensor thermistor


Is there anyone who can make it work with my motherboard or somethink
like this from tyan?
The problem not lm-sensors specific because I get the same with speedfan
or motherboard monitor app in windows. I tryed to search but I go
nowhere with google. Bios upgrade also impossible if it would be the
problem, because tyan doesn't support this board anymore. The board has
6 fan connectors and I tried all but still the same results.

Second time I used sensors-detect and put every sensor specific thing to 
module, maybe some combinations are not work. But now when I configured 
with sensors-detect the temperature buggy, fan speed 0 every time so I 
switch back and compile them again to the kernel, point is linux mbmon 
program working without lm-sensors and it's give me the best results, 
fan speed OK every time I start it, how can be this possible?

Regards,

Jax

[lm-sensors] Tyan S2466N fan control help

[Rudolf Marek]

Hi Jax,

> Is there anyone who can make it work with my motherboard or somethink
> like this from tyan?
> The problem not lm-sensors specific because I get the same with speedfan
> or motherboard monitor app in windows. I tryed to search but I go
> nowhere with google. Bios upgrade also impossible if it would be the
> problem, because tyan doesn't support this board anymore. The board has
> 6 fan connectors and I tried all but still the same results.

Perhaps they do not have PWM transitors connected so you cannot control the fan
speed.

If the fan speed measurements are zero, then you need to change something called
 "Fan divisor" Please check the sensors.conf file, find correct section and

set fan1_div 4

Add lines something like this (8 should be used for slower fans)

Then run sensors -s to apply the change.

As for the temps. 77 is a lot how do you cool it?

Regards
Rudolf