From: Edgar Hucek <hostmaster@ed-soft.at>
To: LKML <linux-kernel@vger.kernel.org>,
Linus Torvalds <torvalds@osdl.org>,
akpm@osdl.org
Subject: [PATCH 1/3] add-imacfb-docu-and-detection.patch
Date: Mon, 31 Jul 2006 10:25:01 +0200 [thread overview]
Message-ID: <44CDBE5D.8020504@ed-soft.at> (raw)
This Patch add basic Machine detection to imacfb and
some Ducumentation bits for imacfb.
Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at>
diff -uNr linux-2.6.18-rc2/Documentation/fb/imacfb.txt linux-2.6.18-rc2.mactel/Documentation/fb/imacfb.txt
--- linux-2.6.18-rc2/Documentation/fb/imacfb.txt 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.18-rc2.mactel/Documentation/fb/imacfb.txt 2006-07-26 20:54:07.000000000 +0200
@@ -0,0 +1,31 @@
+
+What is imacfb?
+===============
+
+This is a generic EFI platform driver for Intel based Apple computers.
+Imacfb is only for EFI booted Intel Macs.
+
+Supported Hardware
+==================
+
+iMac 17"/20"
+Macbook
+Macbook Pro 15"/17"
+MacMini
+
+How to use it?
+==============
+
+Imacfb does not have any kind of autodetection of your machine.
+You have to add the fillowing kernel parameters in your elilo.conf:
+ Macbook :
+ video=imacfb:macbook
+ MacMini :
+ video=imacfb:mini
+ Macbook Pro 15", iMac 17" :
+ video=imacfb:i17
+ Macbook Pro 17", iMac 20" :
+ video=imacfb:i20
+
+--
+Edgar Hucek <gimli@dark-green.com>
diff -uNr linux-2.6.18-rc2/drivers/video/imacfb.c linux-2.6.18-rc2.mactel/drivers/video/imacfb.c
--- linux-2.6.18-rc2/drivers/video/imacfb.c 2006-07-16 10:38:27.000000000 +0200
+++ linux-2.6.18-rc2.mactel/drivers/video/imacfb.c 2006-07-25 13:53:35.000000000 +0200
@@ -18,6 +18,8 @@
#include <linux/screen_info.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
#include <asm/io.h>
@@ -28,7 +30,7 @@
M_I20,
M_MINI,
M_MACBOOK,
- M_NEW
+ M_UNKNOWN
} MAC_TYPE;
/* --------------------------------------------------------------------- */
@@ -52,10 +54,36 @@
};
static int inverse;
-static int model = M_NEW;
+static int model = M_UNKNOWN;
static int manual_height;
static int manual_width;
+static int set_system(struct dmi_system_id *id)
+{
+ printk(KERN_INFO "imacfb: %s detected - set system to %ld\n",
+ id->ident, (long)id->driver_data);
+
+ model = (long)id->driver_data;
+
+ return 0;
+}
+
+static struct dmi_system_id __initdata dmi_system_table[] = {
+ { set_system, "iMac4,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION,"iMac4,1") }, (void*)M_I17},
+ { set_system, "MacBookPro1,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_BIOS_VERSION,"MacBookPro1,1") }, (void*)M_I17},
+ { set_system, "MacBook1,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME,"MacBook1,1")}, (void *)M_MACBOOK},
+ { set_system, "Macmini1,1", {
+ DMI_MATCH(DMI_BIOS_VENDOR,"Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME,"Macmini1,1")}, (void *)M_MINI},
+ {},
+};
+
#define DEFAULT_FB_MEM 1024*1024*16
/* --------------------------------------------------------------------- */
@@ -149,7 +177,6 @@
screen_info.lfb_linelength = 1472 * 4;
screen_info.lfb_base = 0x80010000;
break;
- case M_NEW:
case M_I20:
screen_info.lfb_width = 1680;
screen_info.lfb_height = 1050;
@@ -207,6 +234,10 @@
size_remap = size_total;
imacfb_fix.smem_len = size_remap;
+#ifndef __i386__
+ screen_info.imacpm_seg = 0;
+#endif
+
if (!request_mem_region(imacfb_fix.smem_start, size_total, "imacfb")) {
printk(KERN_WARNING
"imacfb: cannot reserve video memory at 0x%lx\n",
@@ -324,8 +355,16 @@
int ret;
char *option = NULL;
- /* ignore error return of fb_get_options */
- fb_get_options("imacfb", &option);
+ if (!efi_enabled)
+ return -ENODEV;
+ if (!dmi_check_system(dmi_system_table))
+ return -ENODEV;
+ if (model == M_UNKNOWN)
+ return -ENODEV;
+
+ if (fb_get_options("imacfb", &option))
+ return -ENODEV;
+
imacfb_setup(option);
ret = platform_driver_register(&imacfb_driver);
diff -uNr linux-2.6.18-rc2/drivers/video/Kconfig linux-2.6.18-rc2.mactel/drivers/video/Kconfig
--- linux-2.6.18-rc2/drivers/video/Kconfig 2006-07-16 10:38:27.000000000 +0200
+++ linux-2.6.18-rc2.mactel/drivers/video/Kconfig 2006-07-25 13:30:55.000000000 +0200
@@ -552,7 +552,7 @@
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
- depends on (FB = y) && X86
+ depends on (FB = y) && X86 && EFI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
next reply other threads:[~2006-07-31 8:25 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-31 8:25 Edgar Hucek [this message]
2006-07-31 15:51 ` [PATCH 1/3] add-imacfb-docu-and-detection.patch Olaf Hering
2006-07-31 18:35 ` Randy.Dunlap
2006-07-31 19:32 ` Joseph Fannin
2006-07-31 19:49 ` Edgar Hucek
2006-07-31 23:44 ` Antonino A. Daplas
2006-08-01 9:33 ` Andrey Panin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44CDBE5D.8020504@ed-soft.at \
--to=hostmaster@ed-soft.at \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.