[Bluez-users] can't change HCI and LMP version on Cellink BTA-6030

[Bluez-users] can't change HCI and LMP version on Cellink BTA-6030

[Denis]

Hello!
Few days ago I've got Cellink BTA-6030 Bluetooth dongle but have a 
problem installing it on my Debian box for which it was bought.
It works slower than my previous LinkSys BT100 V1.1 Bluetooth, on other 
end I've got Canyon V1.2

After some reading I've checked how device is identify itself and spot 
that from remote WinXP notebook it's reported that LMP feature - unknown 
and LMP Version is simply blank. I've recompiled BlueZ 3.2 with bccmd 
enabled and tried perform these steps:
----------------------------------------------------------------------------------------------
# bccmd psget version
The HCI and LMP version reported locally: 0x0101 (257)
# bccmd psset version 0x0303
# bccmd psget remver
Can't execute command: No such device or address (6)
# bccmd psset remver 0x0003
# bccmd warmreset
# bccmd psget version
The HCI and LMP version reported locally: 0x0101 (257)
# bccmd psget remver
Can't execute command: No such device or address (6)
----------------------------------------------------------------------------------------------

But as you can see it doesn't let me to reset LMP version. From other 
side if plug this device in WinXP notebook it's reported as v2.0 device.

Any ideas how this could be fixed and maybe I'm doing something wrong?

Thank you!
Best Regards,
Denis Stenderchuck
http://forum.weblamp.net/linux
http://www.pharos-search.com


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] can't change HCI and LMP version on Cellink BTA-6030

[Marcel Holtmann]

Hi Denis,

> Few days ago I've got Cellink BTA-6030 Bluetooth dongle but have a 
> problem installing it on my Debian box for which it was bought.
> It works slower than my previous LinkSys BT100 V1.1 Bluetooth, on other 
> end I've got Canyon V1.2
> 
> After some reading I've checked how device is identify itself and spot 
> that from remote WinXP notebook it's reported that LMP feature - unknown 
> and LMP Version is simply blank. I've recompiled BlueZ 3.2 with bccmd 
> enabled and tried perform these steps:
> ----------------------------------------------------------------------------------------------
> # bccmd psget version
> The HCI and LMP version reported locally: 0x0101 (257)
> # bccmd psset version 0x0303
> # bccmd psget remver
> Can't execute command: No such device or address (6)
> # bccmd psset remver 0x0003
> # bccmd warmreset
> # bccmd psget version
> The HCI and LMP version reported locally: 0x0101 (257)
> # bccmd psget remver
> Can't execute command: No such device or address (6)
> ----------------------------------------------------------------------------------------------
> 
> But as you can see it doesn't let me to reset LMP version. From other 
> side if plug this device in WinXP notebook it's reported as v2.0 device.
> 
> Any ideas how this could be fixed and maybe I'm doing something wrong?

the bccmd defaults for the used stores are chosen the way that you can't
mess up your dongle. This means that you have explicitly choose a store
that is persistent. However the best is to use psread and then simply
use psclr to remove the bogus PS key.

In general if you don't know what you are doing, then don't touch the PS
keys.

Regards

Marcel



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] can't change HCI and LMP version on Cellink BTA-6030

[Denis]

Hi Marcel! First of all let me thank you for making great peace of 
software, I'd be lost without it!
> In general if you don't know what you are doing, then don't touch the PS
> keys.
yeah I know this rule, but I'd like to learn this, and correct the way 
dongle behave so I can utilize it at full power. So maybe you can 
provide me with more information on this issue, I'd like to take a risk 
and wouldn't blame you if dongle become not useable.

> the bccmd defaults for the used stores are chosen the way that you can't
> mess up your dongle. This means that you have explicitly choose a store
> that is persistent. However the best is to use psread and then simply
> use psclr to remove the bogus PS key.
not sure which key to remove as I've run psread before and didn't find 
key representing bluetooth protocol for remote PC.

Maybe you can point me on where to look for information so I can 
understand how it works or maybe I can post readout of psread and you 
advice me what needs to be corrected?

Thank you!
Best Regards,
Denis Stenderchuck
http://forum.weblamp.net/linux
http://www.pharos-search.com



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users