From mboxrd@z Thu Jan  1 00:00:00 1970
From: Daniel Smolik <marvin@mydatex.cz>
Date: Thu, 03 Aug 2006 15:11:59 +0000
Subject: Re: serial console broken on Ultra 5
Message-Id: <44D2123F.9050307@mydatex.cz>
List-Id: <sparclinux.vger.kernel.org>
References: <Pine.SOC.4.61.0607311538510.25364@math.ut.ee>
In-Reply-To: <Pine.SOC.4.61.0607311538510.25364@math.ut.ee>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: sparclinux@vger.kernel.org

Marc Zyngier napsal(a):
>>>>>>"Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
> 
> 
> Daniel> I test 2.6.18-rc2 over rsc console and I see nothing after
> Daniel> Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid.
> Daniel> I will test 18rc-3 and see.
> 
> As David wrote, there was some fixes to E250 serial console introduced
> between rc2 and rc3.
> 
> Please note that I didn't test RSC console though (I don't trust RSC
> enough to let it handle my console directly, and I only use it to
> power-on/reset the machine remotely).
> 
> 	M.

Yes I understatd. I compile 2.6.18-rc2 and PROM console via rsc didn't 
work :-( and my E250 with the same config as 2.6.17.2 didn't boot but 
I don't know why because I haven't console :-).


			Dan