From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Smolik Date: Thu, 03 Aug 2006 15:49:01 +0000 Subject: Re: serial console broken on Ultra 5 Message-Id: <44D21AED.7080807@mydatex.cz> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org Daniel Smolik napsal(a): > Marc Zyngier napsal(a): > >>>>>>> "Daniel" = Daniel Smolik writes: >> >> >> >> Daniel> I test 2.6.18-rc2 over rsc console and I see nothing after >> Daniel> Uncompresing Linux.... With 2.6.17.2 work well. E250 Debian Sid. >> Daniel> I will test 18rc-3 and see. >> >> As David wrote, there was some fixes to E250 serial console introduced >> between rc2 and rc3. >> >> Please note that I didn't test RSC console though (I don't trust RSC >> enough to let it handle my console directly, and I only use it to >> power-on/reset the machine remotely). >> >> M. > > > Yes I understatd. I compile 2.6.18-rc2 and PROM console via rsc didn't Sorry 2.6.18-rc3 of course ^^^^^^^^^^^ Dan > work :-( and my E250 with the same config as 2.6.17.2 didn't boot but I > don't know why because I haven't console :-). > > > Dan > > - > To unsubscribe from this list: send the line "unsubscribe sparclinux" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html