From: Daniel Smolik <marvin@mydatex.cz>
To: sparclinux@vger.kernel.org
Subject: Re: serial console broken on Ultra 5
Date: Fri, 04 Aug 2006 20:08:48 +0000 [thread overview]
Message-ID: <44D3A950.9070800@mydatex.cz> (raw)
In-Reply-To: <Pine.SOC.4.61.0607311538510.25364@math.ut.ee>
Marc Zyngier napsal(a):
>>>>>>"Daniel" = Daniel Smolik <marvin@mydatex.cz> writes:
>
>
> Daniel> Console: switching to mono PROM 80x34
> Daniel> /pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
> Daniel> /pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
> Daniel> se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
> Daniel> Console: ttyS2 (SAB82532)
> Daniel> SUNSAB baud:115200 quot:0
> Daniel> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^this is added by me as you want.
>
> Ok, that's indeed what I suspected... Looks like the RSC setting have
> some adverse effect on the uart_get_divisor() logic.
>
> I'll try to give it a look.
>
> Thanks for the report,
>
> M.
There is kernel compiled with gcc-4.0.
Dan
Loaded kernel version 2.6.18
PROMLIB: Sun IEEE Boot Prom 'OBP 3.30.0 2003/11/11 10:37'
PROMLIB: Root node compatible: sun4u
Linux version 2.6.18-rc3 (root@sunik) (gcc version 4.0.4 20060730 (prerelease) (
Debian 4.0.3-6)) #3 Fri Aug 4 21:46:49 CEST 2006
ARCH: SUN4U
Ethernet address: 08:00:20:c4:0d:36
Remapping the kernel... done.
PROM: Built device tree with 71570 bytes of memory.
Booting Linux...
CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):l
ine_sz(64)]
Built 1 zonelists. Total pages: 64967
Kernel command line: root=/dev/sdb1 ro video=pm2fb:mode:800x600-60,font:SUN12x22
,ypan devfs=nomount elevator=anticipatory -p
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
Memory: 514528k available (2032k kernel code, 672k data, 128k init) [fffff800000
00000,000000001feb0000]
Calibrating delay using timer specific routine.. 800.26 BogoMIPS (lpj@01343)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing for controllers.
Console: switching to mono PROM 80x34
/pci@1f,4000/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 9
/pci@1f,4000/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 10
se@14,400000: ttyS0 at MMIO 0x1fff1400000 (irq = 7) is a SAB82532 V3.2
Console: ttyS2 (SAB82532) \|/ ____ \|/
"@'/ .. \`@"
/_| \__/ |_\
\__U_/
swapper(1): TL0: Kernel divide by zero. [#1]
TSTATE: 0000000080f01606 TPC: 0000000000557864 TNPC: 0000000000557868 Y: 0000000
0 Not tainted
TPC: <sunsab_convert_to_sab+0x18c/0x240>
g0: 0000000000000000 g1: 0000000000000000 g2: 0000000000000056 g3: 0000000000000
000
g4: fffff8001fe819e0 g5: 0000000000000000 g6: fffff8001fd80000 g7: 0000000000000
000
o0: fffff8001fe6c5b0 o1: 0000000000001cb2 o2: 0000000000000000 o3: 0000000000660
c00
o4: 0000000000000001 o5: 0000000000660eb8 sp: fffff8001fd82dc1 ret_pc: 000000000
05576f0
RPC: <sunsab_convert_to_sab+0x18/0x240>
l0: fffff8001fe6c660 l1: ffffffffffffffff l2: 0000000000431c00 l3: 0000000000000
000
l4: 0000000000000000 l5: fffff8001fa6fe60 l6: 0000000000000000 l7: 0000000000000
008
i0: fffff8001fe6c5b0 i1: 0000000000001cb2 i2: 0000000000000000 i3: 000000000001c
200
i4: 0000000000000000 i5: fffff8001fa71748 i6: fffff8001fd82e81 i7: 0000000000558
cc4
I7: <sunsab_console_setup+0x10c/0x1c0>
Caller[0000000000558cc4]: sunsab_console_setup+0x10c/0x1c0
Caller[000000000044dce4]: register_console+0x20c/0x280
Caller[00000000005532a8]: uart_add_one_port+0x290/0x2e0
Caller[0000000000557cec]: sab_probe+0xb4/0xe0
Caller[00000000004292a8]: of_device_probe+0x50/0x80
Caller[000000000055b4e0]: driver_probe_device+0x48/0xe0
Caller[000000000055b5e0]: __driver_attach+0x68/0x80
Caller[000000000055a7dc]: bus_for_each_dev+0x44/0x80
Caller[000000000055ad08]: bus_add_driver+0x70/0x140
Caller[0000000000416f64]: init+0x8c/0x2e0
Caller[0000000000417f50]: kernel_thread+0x38/0x60
Caller[0000000000416e50]: rest_init+0x18/0x40
Instruction DUMP: 90100018 93366000 81802000 <9470400a> 7fffe99e 9532a000 c2
0e20d0 90102004 920620b0
Kernel panic - not syncing: Attempted to kill init!
<0>Press Stop-A (L1-A) to return to the boot prom
SUNSAB baud:115200 quot:0
next prev parent reply other threads:[~2006-08-04 20:08 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-31 12:43 serial console broken on Ultra 5 Meelis Roos
2006-07-31 12:48 ` Meelis Roos
2006-07-31 15:53 ` Marc Zyngier
2006-07-31 20:47 ` David Miller
2006-08-01 7:10 ` Jurij Smakov
2006-08-01 7:15 ` Meelis Roos
2006-08-02 8:07 ` Meelis Roos
2006-08-02 8:09 ` David Miller
2006-08-03 9:27 ` Daniel Smolik
2006-08-03 9:34 ` David Miller
2006-08-03 11:33 ` Marc Zyngier
2006-08-03 15:11 ` Daniel Smolik
2006-08-03 15:49 ` Daniel Smolik
2006-08-03 16:30 ` Marc Zyngier
2006-08-03 22:24 ` Daniel Smolik
2006-08-04 16:34 ` Marc Zyngier
2006-08-04 17:58 ` Daniel Smolik
2006-08-04 18:08 ` Marc Zyngier
2006-08-04 20:08 ` Daniel Smolik [this message]
2006-08-04 21:46 ` Marc Zyngier
2006-08-04 22:22 ` Daniel Smolik
2006-10-11 14:54 ` Meelis Roos
2006-10-12 9:37 ` David Miller
2006-10-13 6:55 ` Meelis Roos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44D3A950.9070800@mydatex.cz \
--to=marvin@mydatex.cz \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.