From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <44D489D5.2040509@schugy.de> Date: Sat, 05 Aug 2006 14:06:45 +0200 From: Christian Schuglitsch MIME-Version: 1.0 To: BlueZ users References: <20060805103737.GB6035@jimmi.home> In-Reply-To: <20060805103737.GB6035@jimmi.home> Subject: Re: [Bluez-users] Again down with Jabra BT250V Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Am 05.08.2006 12:37 schrieb Jimmi: > Hi everybody, > > It happened already, but the previous times I found always some "magic" > procedure to get out. This time it seems I cannot :( > > I'm using almost the same configuration of Sweta (bluez-devel) with a > dongle DLink DBT120 Rev B4 and a Jabra BT250v, the OS is a Debian Sid, > and I use btsco 0.42. My error is slightly different: "Error: Failed to > connect to SDP Iserver: Permission denied" > > I got the same problem several times in past, almost everytime > the kernel changed (actual is a 2.6.16-2-k7) but by deleting the > /var/lib/bluetooth/00:11:95:7D:83:E9 and restarting the bluetooth daemon > (sometimes several times in different order) I could always obtain the > headset working. This time it seems not anymore possible. I attach > herebelow some output: > > $ hciconfig -a > hci0: Type: USB > BD Address: 00:11:95:7D:83:E9 ACL MTU: 192:8 SCO MTU: 64:8 > UP RUNNING PSCAN > RX bytes:413 acl:0 sco:0 events:19 errors:0 > TX bytes:320 acl:0 sco:0 commands:18 errors:0 > Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: ACCEPT MASTER > Name: 'Titanic-0' > Class: 0x120104 > Service Classes: Networking, Object Transfer > Device Class: Computer, Desktop workstation > HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d > Manufacturer: Cambridge Silicon Radio (10) > > $ hciconfig hci0 revision > hci0: Type: USB > BD Address: 00:11:95:7D:83:E9 ACL MTU: 192:8 SCO MTU: 64:8 > HCI 16.4 > Chip version: BlueCore02-External > Max key size: 56 bit > SCO mapping: HCI > > $ hcitool scan > Scanning ... > 00:07:A4:14:0F:BF Jabra BT 250v > > $ hcitool info 00:07:A4:14:0F:BF > Requesting information ... > Can't create connection: Input/output error > > The corresponding output of $hcidump -X -V -i hci0 is: > > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:07:A4:14:0F:BF ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > >> HCI Event: Command Status (0x0f) plen 4 >> > Create Connection (0x01|0x0005) status 0x00 ncmd 1 > >> HCI Event: PIN Code Request (0x16) plen 6 >> > bdaddr 00:07:A4:14:0F:BF > < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6 > bdaddr 00:07:A4:14:0F:BF > >> HCI Event: Command Complete (0x0e) plen 10 >> > PIN Code Request Negative Reply (0x01|0x000e) ncmd 1 > status 0x00 bdaddr 00:07:A4:14:0F:BF > >> HCI Event: Connect Complete (0x03) plen 11 >> > status 0x18 handle 41 bdaddr 00:07:A4:14:0F:BF type ACL encrypt 0x00 > Error: Pairing Not Allowed > > $btsco 00:07:A4:14:0F:BF > Error: Failed to connect to SDP server: Permission denied > Assuming channel 2 > > Can't connect RFCOMM channel: Permission denied > > The corresponding output of $hcidump -X -V -i hci0 is: > > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:07:A4:14:0F:BF ptype 0xcc18 rswitch 0x00 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > >> HCI Event: Command Status (0x0f) plen 4 >> > Create Connection (0x01|0x0005) status 0x00 ncmd 1 > >> HCI Event: PIN Code Request (0x16) plen 6 >> > bdaddr 00:07:A4:14:0F:BF > < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6 > bdaddr 00:07:A4:14:0F:BF > >> HCI Event: Command Complete (0x0e) plen 10 >> > PIN Code Request Negative Reply (0x01|0x000e) ncmd 1 > status 0x00 bdaddr 00:07:A4:14:0F:BF > >> HCI Event: Connect Complete (0x03) plen 11 >> > status 0x18 handle 41 bdaddr 00:07:A4:14:0F:BF type ACL encrypt 0x00 > Error: Pairing Not Allowed > < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 > >> HCI Event: Command Complete (0x0e) plen 6 >> > Read Voice Setting (0x03|0x0025) ncmd 1 > status 0x00 voice setting 0x0060 > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:07:A4:14:0F:BF ptype 0xcc18 rswitch 0x00 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > >> HCI Event: Command Status (0x0f) plen 4 >> > Create Connection (0x01|0x0005) status 0x00 ncmd 1 > >> HCI Event: PIN Code Request (0x16) plen 6 >> > bdaddr 00:07:A4:14:0F:BF > < HCI Command: PIN Code Request Negative Reply (0x01|0x000e) plen 6 > bdaddr 00:07:A4:14:0F:BF > >> HCI Event: Command Complete (0x0e) plen 10 >> > PIN Code Request Negative Reply (0x01|0x000e) ncmd 1 > status 0x00 bdaddr 00:07:A4:14:0F:BF > >> HCI Event: Connect Complete (0x03) plen 11 >> > status 0x18 handle 42 bdaddr 00:07:A4:14:0F:BF type ACL encrypt 0x00 > Error: Pairing Not Allowed > < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 > enable 2 > >> HCI Event: Command Complete (0x0e) plen 4 >> > Write Scan Enable (0x03|0x001a) ncmd 1 > status 0x00 > < HCI Command: Read Scan Enable (0x03|0x0019) plen 0 > >> HCI Event: Command Complete (0x0e) plen 5 >> > Read Scan Enable (0x03|0x0019) ncmd 1 > status 0x00 enable 2 > > I didn't change anything in my configuration, and I also many times > send in different orders "esdctl stop" and "hciconfig hci0 voice > 0x0060", together with deleting the /var/lib/bluetooth/00:11:95:7D:83:E9 > directory and restaring the bluetooth daemon, of course with the headset > in pairing mode. Is there anything else I may try ? > > Thanks for everything ;) > Sometimes switching my headset (JABRA BT200) on and off didn't work. I had to charge it for a few seconds to reset it. Sometimes there stayed the rfcomm binding. Become root and release rfcomm0 with "rfcomm" if it is left after the connection broke down. I hope that helps. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users