From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
To: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>,
James Bottomley <James.Bottomley@steeleye.com>,
linux-scsi@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
GOTO Masanori <gotom@debian.or.jp>
Subject: Re: [RFC] [PATCH 9/9] drivers/scsi/pcmcia/nsp_cs.h Removal of old scsi code
Date: Sat, 12 Aug 2006 23:03:19 +0200 [thread overview]
Message-ID: <44DE4217.8060501@gmail.com> (raw)
In-Reply-To: <44DE3E5E.3020605@gmail.com>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
diff -uprN -X linux-work/Documentation/dontdiff linux-work-clean/drivers/scsi/pcmcia/nsp_cs.h linux-work/drivers/scsi/pcmcia/nsp_cs.h
--- linux-work-clean/drivers/scsi/pcmcia/nsp_cs.h 2006-08-12 01:50:53.000000000 +0200
+++ linux-work/drivers/scsi/pcmcia/nsp_cs.h 2006-08-12 20:31:31.000000000 +0200
@@ -290,7 +290,6 @@ typedef struct _nsp_hw_data {
#endif
} nsp_hw_data;
-
/****************************************************************************
*
*/
@@ -302,22 +301,13 @@ static int nsp_cs_config (struct
/* Linux SCSI subsystem specific functions */
static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static int nsp_detect_old (struct scsi_host_template *sht);
-static int nsp_release_old(struct Scsi_Host *shpnt);
-#endif
static const char *nsp_info (struct Scsi_Host *shpnt);
static int nsp_proc_info (
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host,
-#endif
char *buffer,
char **start,
off_t offset,
int length,
-#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
- int hostno,
-#endif
int inout);
static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt));
@@ -352,7 +342,6 @@ static struct Scsi_Host *nsp_detect(stru
static int __init nsp_cs_init(void);
static void __exit nsp_cs_exit(void);
-
/* Debug */
#ifdef NSP_DEBUG
static void show_command (Scsi_Cmnd *SCpnt);
@@ -397,7 +386,6 @@ enum _burst_mode {
BURST_MEM32 = 2,
};
-
/**************************************************************************
* SCSI messaage
*/
@@ -409,62 +397,8 @@ enum _burst_mode {
#define MSG_EXT_SDTR 0x01
-
-/**************************************************************************
- * Compatibility functions
- */
-
-/* for Kernel 2.4 */
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
-# define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template)
-# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
-# define scsi_host_put(host) scsi_unregister(host)
-
-typedef void irqreturn_t;
-# define IRQ_NONE /* */
-# define IRQ_HANDLED /* */
-# define IRQ_RETVAL(x) /* */
-
-/* This is ad-hoc version of scsi_host_get_next() */
-static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
-{
- if (host == NULL) {
- return scsi_hostlist;
- } else {
- return host->next;
- }
-}
-
-/* This is ad-hoc version of scsi_host_hn_get() */
-static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
-{
- struct Scsi_Host *host;
-
- for (host = scsi_host_get_next(NULL); host != NULL;
- host = scsi_host_get_next(host)) {
- if (host->host_no == hostno) {
- break;
- }
- }
-
- return host;
-}
-
-static void cs_error(struct pcmcia_device *handle, int func, int ret)
-{
- error_info_t err = { func, ret };
- pcmcia_report_error(handle, &err);
-}
-
-/* scatter-gather table */
-# define BUFFER_ADDR (SCpnt->SCp.buffer->address)
-#endif
-
-/* for Kernel 2.6 */
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
/* scatter-gather table */
# define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset))
-#endif
#endif /*__nsp_cs__*/
/* end */
prev parent reply other threads:[~2006-08-12 21:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <44DE3E5E.3020605@gmail.com>
2006-08-12 21:01 ` [RFC] [PATCH 1/9] drivers/scsi/dpt/dpti_i2o.h Removal of old scsi code Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 2/9] drivers/scsi/gdth.c " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 3/9] drivers/scsi/gdth.h " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 4/9] drivers/scsi/gdth_proc.c " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 5/9] drivers/scsi/ips.c " Michal Piotrowski
2006-08-12 21:02 ` [RFC] [PATCH 6/9] drivers/scsi/ips.h " Michal Piotrowski
2006-08-12 21:03 ` [RFC] [PATCH 7/9] drivers/scsi/nsp32.c " Michal Piotrowski
2006-08-12 21:03 ` [RFC] [PATCH 8/9] drivers/scsi/nsp32.h " Michal Piotrowski
2006-08-12 21:03 ` Michal Piotrowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44DE4217.8060501@gmail.com \
--to=michal.k.k.piotrowski@gmail.com \
--cc=James.Bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=gotom@debian.or.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.