Re: [Bluez-devel] a2pdbtsco won'tcompile (FIX) plus xmmserror(trials andtribulations) howcool is this!!! new patch

["Frédéric DALLEAU" <frederic.dalleau@palmsource.com>]

Hi,

Could you give me the failing log? Is the alsa plugin setup as default =

or explicitly set to xmms?
A few comments about the traces :

avdtp: Accepting incoming connection

That line shows we are awaiting an incoming connexion, you should always ha=
ve it since starting a2dpd. If you start up a2dpd without sending sound, th=
is is one of the two last lines. Nothing should be displayed after.


avdtp: socket 7: Connection from 12:5C:2A:44:0D:00, mtu=3D672

That one show we received an incoming connexion, if we don't have this =

one, it's the headset that do not connect. It will be difficult to know =

why! Try to switch off then on!


avdtp: socket 7: Received failed result=3D-1 (errno=3D11:Resource
temporarily unavailable)
This one is too say we wait for answer but it is just a timeout.

 =

socket 7: Received 2 bytes
00000: 00 01
Those two lines follow the connection from the headset. It's an AVDTP_DISCO=
VER we answer by rejecting the DISCOVER, but we launch xmms who in turn wil=
l start a brand new connection.


Forked xmms --play

That line show we forked to start xmms. It should appear a few seconds =

after the previous one.


Fr=E9d=E9ric




Waldram, Andrew (SBS UK) a =E9crit :
>  =

> Fr=E9d=E9ric
>
> Tried everything you sugested still the same play from start will not sta=
rt xmms (mormaly see below) and pressing pause wait 15 sec then play result=
s in nothing. I would say it was my headphones but it did work from avrcp a=
nd your first patch.
>
> Hcidump does show the press's but a2dpd does not show anything at all jus=
t sits waiting incomming connection.
>
> After repeated tries I did get it once to start xmms (output follows) so =
I'm confident my configuration is correct (could it be timming/parsing blue=
tooth response)
>
> The logs look a little  strange and it doesn't work 99.9% of the time =

>
> I've put markers where I think something may be wrong can you think of an=
ything else I can tru to pin this down (so close yet so far).
>
> On a plus note your latest patches seem to have reduced the latency for s=
kip forward and back .
>   =

Really? I'm really sure to have done nothing about this :D
>  Accepting incoming tcp stream connection
> New connection to bluetooth [44100 hz]
> avrcp: Accepting incoming connection
> avdtp: Accepting incoming connection
> avdtp: socket 7: Connection from 12:5C:2A:44:0D:00, mtu=3D672
> avdtp: socket 7: Received failed result=3D-1 (errno=3D11:Resource
> temporarily unavailable)<------------------------------------------------=
-------
> avdtp: socket 7: Received failed result=3D-1 (errno=3D11:Resource
> temporarily unavailable)<------------------------------------------------=
-------
> socket 7: Received 2 bytes
> 00000: 00 01
> DEBUG: a2dp_handle_avdtp_message: (errno=3D11:Resource temporarily
> unavailable)Unexpected headset directive 1  <----------------------------=
---------------------------
> DEBUG: a2dp_handle_avdtp_message: Answering command packet
> (msgtype=3DMESSAGE_TYPE_REJECT,signal=3D1)
> avdtp: socket 7: Received frame, start xmms --play
> avdtp: socket 7: timed out
> Forked xmms --play
> Message: device: pcm.a2dpd
> immsd: version 3.0.1 ready...
> DEBUG: _snd_pcm_a2dpd_open: (errno=3D0:Success)name pcm.a2dpd mode 1
> DEBUG: a2dp_alloc: (errno=3D0:Success)Init
> DEBUG: a2dp_alloc: (errno=3D0:Success)OK
> DEBUG: a2dp_params: (errno=3D0:Success)a2dp 0x8295e18
> DEBUG: a2dp_params: (errno=3D0:Success)format S16_LE rate 44100 channels 2
> DEBUG: a2dp_params: (errno=3D0:Success)frame_bytes 4 period_bytes 8192
> period_size 2048 buffer_size 4096
> DEBUG: a2dp_prepare: (errno=3D0:Success)a2dp 0x8295e18
> Accepted 7
> PCM thread 0.7 started
> Accepting incoming tcp stream connection
> DEBUG: a2dp_new: Begin
> DEBUG: a2dp_new: bdaddr/dest is 00:0D:44:2A:5C:12
> DEBUG: a2dp_alloc: Begin
> DEBUG: a2dp_connect: a2dp 0x8057810
> DEBUG: connect_stream: Begin
> DEBUG: connect_stream: Using address: 12:5C:2A:44:0D:00
> DEBUG: detect_a2dp: Begin
>
> -------------------------------------------------------------------------=
--------- =

>
> -----Original Message-----
> From: bluez-devel-bounces@lists.sourceforge.net [mailto:bluez-devel-bounc=
es@lists.sourceforge.net] On Behalf Of Brad Midgley
> Sent: 17 August 2006 15:07
> To: BlueZ development
> Subject: Re: [Bluez-devel] a2pdbtsco won'tcompile (FIX) plus xmmserror(tr=
ials andtribulations) howcool is this!!! new patch
>
> Fr=E9d=E9ric
>
>   =

>> Try to use the latest patch http://fdalleau.free.fr/patch_to_try
>> Minor changes has been done. It worked all night long!
>>     =

>
> FYI I just applied this.
>
> Brad
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job ea=
sier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job ea=
sier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D121642
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
>   =



-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easi=
er
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel