All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brice Goglin <brice@myri.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: netdev@vger.kernel.org
Subject: [PATCH 1/2] myri10ge: use netif_msg_link
Date: Mon, 21 Aug 2006 17:36:49 -0400	[thread overview]
Message-ID: <44EA2771.1000203@myri.com> (raw)
In-Reply-To: <44EA2575.7070307@myri.com>

[PATCH] myri10ge: use netif_msg_link

Add msg_enable and use netif_msg_link to enable/disable reporting
of link status changes since some Ethernet switches seem to generate
a lot of status changes under some circumstances and some people
want to avoid useless flooding in the logs.

Also add a counter for link status changes to statistics.

Signed-off-by: Brice Goglin <brice@myri.com>
---
 drivers/net/myri10ge/myri10ge.c |   46 +++++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 7 deletions(-)

Index: linux-mm/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-mm.orig/drivers/net/myri10ge/myri10ge.c	2006-08-20 01:11:07.000000000 -0400
+++ linux-mm/drivers/net/myri10ge/myri10ge.c	2006-08-21 17:14:06.000000000 -0400
@@ -192,6 +192,8 @@
 	u32 read_dma;
 	u32 write_dma;
 	u32 read_write_dma;
+	u32 link_changes;
+	u32 msg_enable;
 };
 
 static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
@@ -257,6 +259,12 @@
 MODULE_PARM_DESC(myri10ge_max_irq_loops,
 		 "Set stuck legacy IRQ detection threshold\n");
 
+#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
+
+static int myri10ge_debug = -1;	/* defaults above */
+module_param(myri10ge_debug, int, 0);
+MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
+
 #define MYRI10GE_FW_OFFSET 1024*1024
 #define MYRI10GE_HIGHPART_TO_U32(X) \
 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -764,6 +772,7 @@
 	mgp->rx_small.cnt = 0;
 	mgp->rx_done.idx = 0;
 	mgp->rx_done.cnt = 0;
+	mgp->link_changes = 0;
 	status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
 	myri10ge_change_promisc(mgp, 0, 0);
 	myri10ge_change_pause(mgp, mgp->pause);
@@ -1085,13 +1094,19 @@
 		if (mgp->link_state != stats->link_up) {
 			mgp->link_state = stats->link_up;
 			if (mgp->link_state) {
-				printk(KERN_INFO "myri10ge: %s: link up\n",
-				       mgp->dev->name);
+				if (netif_msg_link(mgp))
+					printk(KERN_INFO
+					       "myri10ge: %s: link up\n",
+					       mgp->dev->name);
 				netif_carrier_on(mgp->dev);
+				mgp->link_changes++;
 			} else {
-				printk(KERN_INFO "myri10ge: %s: link down\n",
-				       mgp->dev->name);
+				if (netif_msg_link(mgp))
+					printk(KERN_INFO
+					       "myri10ge: %s: link down\n",
+					       mgp->dev->name);
 				netif_carrier_off(mgp->dev);
+				mgp->link_changes++;
 			}
 		}
 		if (mgp->rdma_tags_available !=
@@ -1293,8 +1308,9 @@
 	"serial_number", "tx_pkt_start", "tx_pkt_done",
 	"tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
 	"wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
-	"link_up", "dropped_link_overflow", "dropped_link_error_or_filtered",
-	"dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
+	"link_changes", "link_up", "dropped_link_overflow",
+	"dropped_link_error_or_filtered", "dropped_runt",
+	"dropped_overrun", "dropped_no_small_buffer",
 	"dropped_no_big_buffer"
 };
 
@@ -1345,6 +1361,7 @@
 	data[i++] = (unsigned int)mgp->stop_queue;
 	data[i++] = (unsigned int)mgp->watchdog_resets;
 	data[i++] = (unsigned int)mgp->tx_linearized;
+	data[i++] = (unsigned int)mgp->link_changes;
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->link_up);
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow);
 	data[i++] =
@@ -1355,6 +1372,18 @@
 	data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_big_buffer);
 }
 
+static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
+{
+	struct myri10ge_priv *mgp = netdev_priv(netdev);
+	mgp->msg_enable = value;
+}
+
+static u32 myri10ge_get_msglevel(struct net_device *netdev)
+{
+	struct myri10ge_priv *mgp = netdev_priv(netdev);
+	return mgp->msg_enable;
+}
+
 static struct ethtool_ops myri10ge_ethtool_ops = {
 	.get_settings = myri10ge_get_settings,
 	.get_drvinfo = myri10ge_get_drvinfo,
@@ -1375,7 +1404,9 @@
 #endif
 	.get_strings = myri10ge_get_strings,
 	.get_stats_count = myri10ge_get_stats_count,
-	.get_ethtool_stats = myri10ge_get_ethtool_stats
+	.get_ethtool_stats = myri10ge_get_ethtool_stats,
+	.set_msglevel = myri10ge_set_msglevel,
+	.get_msglevel = myri10ge_get_msglevel
 };
 
 static int myri10ge_allocate_rings(struct net_device *dev)
@@ -2580,6 +2611,7 @@
 	mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
 	mgp->pause = myri10ge_flow_control;
 	mgp->intr_coal_delay = myri10ge_intr_coal_delay;
+	mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
 	init_waitqueue_head(&mgp->down_wq);
 
 	if (pci_enable_device(pdev)) {



       reply	other threads:[~2006-08-21 21:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <44EA2575.7070307@myri.com>
2006-08-21 21:36 ` Brice Goglin [this message]
2006-08-24  4:44   ` [PATCH 1/2] myri10ge: use netif_msg_link Jeff Garzik
2006-08-21 21:36 ` [PATCH 2/2] myri10ge: use multicast support in the firmware Brice Goglin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=44EA2771.1000203@myri.com \
    --to=brice@myri.com \
    --cc=jeff@garzik.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.