From: Eran <eran_l@over-here.org>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Still couldn't get AmbiCom BT2000E card to work...
Date: Mon, 28 Aug 2006 01:04:42 +0300 [thread overview]
Message-ID: <44F216FA.3020502@over-here.org> (raw)
In-Reply-To: <44F0B3D2.2060102@libero.it>
Hi,
Yes, I did setserial as you wrote (also tried that to many different
speeds).
dmesg shows nothing, but then again - I'm on a 2.6.17.11 kernel compiled
by myself.
I've added some debug printouts in the serial driver. I will mail them
to you , if you are interested...
Massimo Piccioni wrote:
> Did you setserial /dev/ttyS1 baud_base 912600 ?
> Your dmesg?
>
> I'm using kernel 2.6.16.16.
>
>
>
> Eran wrote:
>
>> Hi!
>>
>>
>> First, thanks for the advice.
>>
>> Second, I've just tried it and got:
>>
>> [root@hulud /etc/bluetooth]# hciattach /dev/ttyS1 bcsp -s 912600
>> BCSP initialization timed out
>>
>> It doesn't matter if I try it with or without special speeds... it still
>> wouldn't do.
>>
>>
>> Any ideas?
>>
>>
>> Massimo Piccioni wrote:
>>
>>
>>
>>> Hi,
>>>
>>> you should use bcsp type, not ericsson.
>>> Try:
>>>
>>> setserial /dev/ttyS1 baud_base 912600
>>> hciattach /dev/ttyS1 bcsp -s 912600
>>> hciattach hci0 up
>>>
>>> (where /dev/ttyS1 is the serial dev reported by PCMCIA subsystem)
>>> It works fine with my Hamlet HCFBT2, that should be an Ambicom BT2000E
>>> clone (same PCMCIA manfid ...).
>>>
>>> Ciao
>>> Massimo
>>>
>>>
>>>
>>> Eran wrote:
>>>
>>>
>>>
>>>> Hello,
>>>>
>>>>
>>>> I know this is a problem that's have been on this list for more than
>>>> once. However, since I gave it somre more time trying to make the card
>>>> work without success, I would really appreciate it if someone could take
>>>> a look into my description and let me know if he/she has any insights.
>>>>
>>>>
>>>> I have an AmbiCom BT2000E card. The identification:
>>>>
>>>>
>>>> product info: "AmbiCom,Inc", "BT2000E", "Bluetooth PC/CF Card"
>>>> manfid: 0x022d, 0x2000
>>>>
>>>>
>>>> Inside /etc/pcmcia/bluetooth.conf:
>>>>
>>>> card "AmbiCom BT2000E Bluetooth Card"
>>>> version "AmbiCom,Inc", "BT2000E"
>>>> manfid 0x022d, 0x2000
>>>> bind "serial_cs"
>>>>
>>>>
>>>> So far, so good.
>>>>
>>>> hciattach /dev/ttyS1 ericsson
>>>>
>>>> would return with no errors, however hcid will be unable to take device
>>>> up and return a timeout.
>>>>
>>>> The MAC address of the device would be all 00's.
>>>>
>>>>
>>>> I knew, from the past, that a kernel patch may help. I found it on this
>>>> list and eventually applied it from:
>>>>
>>>> http://www.summet.com/x31/socket.html
>>>>
>>>>
>>>> Still, hcid timed out:
>>>>
>>>> Aug 25 19:55:58 hulud hcid[2954]: Sending read scan enable command
>>>> failed: Connection timed out (110)
>>>> Aug 25 19:56:00 hulud hcid[2954]: Can't read address for hci0:
>>>> Connection timed out (110)
>>>> Aug 25 19:56:07 hulud hcid[3108]: Can't init device hci0: Connection
>>>> timed out (110)
>>>>
>>>>
>>>> Then I stumbled into this post to the list:
>>>> http://sourceforge.net/mailarchive/message.php?msg_id=11189831
>>>>
>>>> So I tried setserial /dev/ttyS1 baud_base with various values, low as
>>>> well as high, each time - trying hciattach -s <selected speed>
>>>> /dev/ttyS1 ericsson.
>>>> Each and every time I had the same problem - hcid could not bring the
>>>> interface up.
>>>> I've also tried appending a speed to hciattach, to no avail.
>>>>
>>>> I forgot to mention that I'm on a 2.6.17.11 kernel.
>>>> Has this card been reported to work for anyone on a 2.6 kernel?
>>>>
>>>> I will appreciate any help anyone can give.
>>>>
>>>> Thank you all in advance,
>>>> ERan
>>>>
>>>> -------------------------------------------------------------------------
>>>> Using Tomcat but need to do more? Need to support web services, security?
>>>> Get stuff done quickly with pre-integrated technology to make your job easier
>>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>>> _______________________________________________
>>>> Bluez-users mailing list
>>>> Bluez-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>>>
>>>>
>>>>
>>>>
>>>>
>>> -------------------------------------------------------------------------
>>> Using Tomcat but need to do more? Need to support web services, security?
>>> Get stuff done quickly with pre-integrated technology to make your job easier
>>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>>> _______________________________________________
>>> Bluez-users mailing list
>>> Bluez-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>>
>>>
>>>
>> -------------------------------------------------------------------------
>> Using Tomcat but need to do more? Need to support web services, security?
>> Get stuff done quickly with pre-integrated technology to make your job easier
>> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>> _______________________________________________
>> Bluez-users mailing list
>> Bluez-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bluez-users
>>
>>
>>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
prev parent reply other threads:[~2006-08-27 22:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-25 16:53 [Bluez-users] Still couldn't get AmbiCom BT2000E card to work Eran
2006-08-26 20:16 ` Massimo Piccioni
2006-08-26 20:32 ` Eran
2006-08-26 20:49 ` Massimo Piccioni
2006-08-27 22:04 ` Eran [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44F216FA.3020502@over-here.org \
--to=eran_l@over-here.org \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.