From mboxrd@z Thu Jan 1 00:00:00 1970 From: r.marek@sh.cvut.cz (Rudolf Marek) Date: Wed, 30 Aug 2006 14:10:25 +0000 Subject: [lm-sensors] [PATCH] W83793 driver Message-Id: <44F59C51.6070004@sh.cvut.cz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hello all, Jean, this is the final version of the driver. It contains device_create... / device_remove... stuff. There is no change after w83793_revise_6.patch, which was the last one. This patch adds support for the W83793 hardware monitoring driver. This driver was contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: Yuan Mu Signed-off-by: Rudolf Marek The documentation patch will follow. Despite countless of hours I spent reviewing the driver I'm not sure if I caught everything and I probably never know ;) The driver was tested on real hardware and also with the help of i2c-stub, I concentrated on not-used inputs on Yuan MB, as well as different fan configurations. As far I know everything works fine. So I think there should not be and problem with basic info from fans, temps and voltages. Yuan did also independent testing so I think we at least know that the driver has no major issue that would be a show stopper. The driver was run through indent so there should not be any forgotten spaces, nor too long lines etc etc... Regards Rudolf -------------- next part -------------- A non-text attachment was scrubbed... Name: w83793_release.patch Type: text/x-patch Size: 50966 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060830/81c605a1/attachment-0001.bin