From mboxrd@z Thu Jan  1 00:00:00 1970
From: John Clark <jclark@metricsystems.com>
Date: Fri, 08 Sep 2006 19:24:57 +0000
Subject: [LARTC] Simple set up to shape traffic...
Message-Id: <4501C389.2030506@metricsystems.com>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

I looked and found a 'very simple' command sequence to shape traffic to 
a specific
host. However, I 'cribbed' the command sequence from a online tutoral 
from 'somewhere'.

I now have lost the example, and my altered sequence.

the command I am getting an 'RTNETLINK' Invalid argument error from is:

tc qdisc add dev eth0 root handle 1: cbq avpkt 1000 bandwidth 3700kbit

I don't think I used this particular set of options previously. Somehow 
I think I
was using the sfq rather than the cbq.

The goal that I have at the moment is to limit the bandwidth of data 
sent to a
particular host. I had this working but seem to have lost a specific 
parameter sequence.

Thanks
John Clark

_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc