From: ali shahrokni <shahrokni@gmail.com>
To: linux-newbie@vger.kernel.org
Subject: Firewire camera and PCMCIA card under Debian
Date: Mon, 11 Sep 2006 17:37:06 +0100 [thread overview]
Message-ID: <450590B2.4000809@laposte.net> (raw)
Hello,
I am trying to connect a unibrain firewire camera to my T40 thinkpad
using a PCMCIA firecard. I am running debian testing and kernel 2.6.15.
The card is detected and the output of dmeg follows but the camera
doesn't even turn on and nothing happens when I connect it to the card!
Any help would be greatly appreciated.
Cheers,
Ali
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
usb 2-2: new full speed USB device using uhci_hcd and address 3
pccard: card ejected from slot 1
ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0814435800000528]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
pccard: CardBus card inserted into slot 1
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:07:00.0 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[c4004000-c40047ff] Max Packet=[2048]
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0814435800000528]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
next reply other threads:[~2006-09-11 16:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-11 16:37 ali shahrokni [this message]
2006-09-12 6:41 ` Firewire camera and PCMCIA card under Debian Ray Olszewski
[not found] <4505910C.8030505@laposte.net>
2006-09-11 16:39 ` ali shahrokni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=450590B2.4000809@laposte.net \
--to=shahrokni@gmail.com \
--cc=linux-newbie@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.