From: Steve Roemen <stever@carlislefsp.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: isicom module oops 2.6.17.13
Date: Wed, 13 Sep 2006 11:44:55 -0500 [thread overview]
Message-ID: <45083587.50908@carlislefsp.com> (raw)
In-Reply-To: <45082055.7010309.reply@wsc.cz>
here's with the firmware in the (converted to .deb rpm from
ftp://ftp.linux.org.uk/pub/linux/alan/Kernel/Drivers/ISI/ )
isicom 0000:00:10.0: ISI PCI Card(Device ID 0x2052)
isicom 0000:00:10.0: -Done
isicom 0000:00:10.0: Firmware requested, size: 6553
isicom 0000:00:10.0: Firmware loaded, last values:
WC: 5, FD: e09cc000, FP: e09cd999
isicom 0000:00:10.0: Card is not free: 1836
isicom: probe of 0000:00:10.0 failed with error -5
here's with the firmware from ftp://ftp.multitech.com/isi-cards/linux/
l309_22x_24x.tar
isicom 0000:00:10.0: ISI PCI Card(Device ID 0x2052)
isicom 0000:00:10.0: -Done
isicom 0000:00:10.0: Firmware requested, size: 7325
isicom 0000:00:10.0: Firmware loaded, last values:
WC: 1, FD: e09cc000, FP: e09cdc9d
isicom 0000:00:10.0: Card is not free: 1836
isicom: probe of 0000:00:10.0 failed with error -5
Steve
Jiri Slaby wrote:
> Steve Roemen wrote:
>
>> after adding that patch to 2.6.18-rc6-mm2 and trying another card (an
>> isi5634 pci/8) i get this in dmesg while loading the driver:
>>
>> faxserver2:~# modprobe isicom
>> faxserver2:~# cat /var/log/kern.log
>>
>> Sep 13 09:59:11 localhost kernel: isicom 0000:00:10.0: ISI PCI
>> Card(Device ID 0x2052)
>> Sep 13 09:59:14 localhost kernel: isicom 0000:00:10.0: -Done
>> Sep 13 09:59:15 localhost kernel: 00, FP: e09c762c
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c7640
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c7654
>>
>
> [snip]
>
>
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c8964
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 8, FC: 16,
>> FD: e09c7000, FP: e09c8978
>> Sep 13 09:59:15 localhost kernel: isicom 0000:00:10.0: WC: 5, FC: 9, FD:
>> e09c7000, FP: e09c898c
>> Sep 13 09:59:17 localhost kernel: isicom: probe of 0000:00:10.0 failed
>> with error -5
>>
>
> Yes, thanks a lot, but more diagnostics is needed and I forgot to correct for
> loop for checking uploaded firmware...
> Could you revert previous patch and apply this one, please?
>
> diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
> index 6cca4b2..bf371b0 100644
> --- a/drivers/char/isicom.c
> +++ b/drivers/char/isicom.c
> @@ -1756,11 +1756,18 @@ static int __devinit load_firmware(struc
> if (retval)
> goto end;
>
> + dev_info(&pdev->dev, "Firmware requested, size: %u\n", fw->size);
> +
> + retval = -EIO;
> +
> for (frame = (struct stframe *)fw->data;
> frame < (struct stframe *)(fw->data + fw->size);
> - frame++) {
> - if (WaitTillCardIsFree(base))
> + frame = (struct stframe *)((u8 *)frame + 4 +
> + frame->count)) {
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> outw(0xf0, base); /* start upload sequence */
> outw(0x00, base);
> @@ -1772,8 +1779,10 @@ static int __devinit load_firmware(struc
>
> udelay(100); /* 0x2f */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_warn(&pdev->dev, "Card%d rejected load header:\n"
> @@ -1787,8 +1796,10 @@ static int __devinit load_firmware(struc
>
> udelay(50); /* 0x0f */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_err(&pdev->dev, "Card%d got out of sync.Card "
> @@ -1796,8 +1807,9 @@ static int __devinit load_firmware(struc
> goto errrelfw;
> }
> }
> -
> - retval = -EIO;
> + dev_info(&pdev->dev, "Firmware loaded, last values: \n\tWC: %u, "
> + "FD: %p, FP: %p\n",
> + word_count, fw->data, frame);
>
> if (WaitTillCardIsFree(base))
> goto errrelfw;
> @@ -1811,24 +1823,29 @@ static int __devinit load_firmware(struc
>
> /* XXX: should we test it by reading it back and comparing with original like
> * in load firmware package? */
> - for (frame = (struct stframe*)fw->data;
> - frame < (struct stframe*)(fw->data + fw->size);
> - frame++) {
> - if (WaitTillCardIsFree(base))
> + for (frame = (struct stframe *)fw->data;
> + frame < (struct stframe *)(fw->data + fw->size);
> + frame = (struct stframe *)((u8 *)frame + 4 +
> + frame->count)) {
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> outw(0xf1, base); /* start download sequence */
> outw(0x00, base);
> outw(frame->addr, base); /* lsb of address */
>
> - word_count = (frame->count >> 1) + frame->count % 2;
> + word_count = frame->count / 2 + frame->count % 2;
> outw(word_count + 1, base);
> InterruptTheCard(base);
>
> udelay(50); /* 0xf */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_warn(&pdev->dev, "Card%d rejected verify header:\n"
> @@ -1853,8 +1870,10 @@ static int __devinit load_firmware(struc
>
> udelay(50); /* 0xf */
>
> - if (WaitTillCardIsFree(base))
> + if (WaitTillCardIsFree(base)) {
> + dev_err(&pdev->dev, "Card is not free: %u\n", __LINE__);
> goto errrelfw;
> + }
>
> if ((status = inw(base + 0x4)) != 0) {
> dev_err(&pdev->dev, "Card%d verify got out of sync. "
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2006-09-13 16:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-12 16:05 isicom module oops 2.6.17.13 Steve Roemen
2006-09-12 21:53 ` Jiri Slaby
2006-09-13 15:14 ` Steve Roemen
2006-09-13 15:34 ` Jiri Slaby
2006-09-13 16:44 ` Steve Roemen [this message]
2006-09-13 22:29 ` Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45083587.50908@carlislefsp.com \
--to=stever@carlislefsp.com \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.